Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)
-   -   drill motor cost (http://www.chiefdelphi.com/forums/showthread.php?t=16408)

KennethToronto 13-01-2003 09:55

drill motor cost
 
Does anyone know how much a drill a motor is? As well as how many there are in the kit (we found 2)

Greg Perkins 13-01-2003 10:05

ur right, there are only 2 provided in the kit, although we have 2 extras i dont know how much they cost, or where to get them.... persoanlly i would like to gt a set of those for my battlebot


bad

Randy Ai 13-01-2003 11:57

One of ours is kind of broken...so we have to replace it

D.J. Fluck 13-01-2003 12:53

Andy Baker shops for drill Motors

Jeremy_Mc 13-01-2003 12:58

they're around 20 bucks if i'm not wrong...

this was mentioned on another thread


*jeremy

Laz 13-01-2003 20:11

The best way to find out the price of the drill motors is by checking on the big book they sent you. I do not believe they are only $20 but try something over $100.

Cory 13-01-2003 21:01

you don't need to buy these from the big book... Im sure you can find them elsewhere for much cheaper. If it is the EXACT same model, buy it where you see it for the cheapest (And tell everyone on the boards where you purchased it too:) )

Cory

nwagers 13-01-2003 21:07

The motor and the gearbox are ~$80 from Bosch

Laz 13-01-2003 21:25

Thank you so much guys you just saved me a lot of research and work.

Jeremy_Mc 13-01-2003 22:01

whoa really?

someone on another thread (i would link but i can't find it again) that they range from 20-35 dollars! yikes...80 bucks is a lot...

*jeremy

KennethToronto 13-01-2003 22:23

$80?!

Geez...I dropped the motor on the floor and half of it fell apart :eek:

great way to start Mondays eh?

D.J. Fluck 14-01-2003 10:53

Quote:

Originally posted by D.J. Fluck
Andy Baker shops for drill Motors
This link took you to the thread where Andy Baker found drill motors :rolleyes:

Motor (part# 2-607-022-890) = $23 each
Gearbox (part# 2-606-200-917) = $50 each

Kevin N 14-01-2003 21:01

Drill Motor Cost
 
Kenneth,

The drill motor and gear box are $50 each. We ordered two spares yesterday.

Address(Supplier Contact Info): S-B Power Tool
121 Corporate Blvd
South Plainfield, NJ
Phone: 908-769-8208

Good Luck!

Kevin Watson 15-01-2003 03:08

Quote:

Originally posted by D.J. Fluck
Andy Baker shops for drill Motors
Motors cost $23 each.
Transmissions cost $50 each.
UPS ground shipping is $6
UPS overnight shipping is either $20 or $20 plus the $6 stated above (I don't remember which).

The nice guy at Bosch knew exactly what I wanted, just as Andy pointed out in his original post.

-Kevin

Kevin Watson 15-01-2003 15:14

Quote:

Originally posted by Kevin Watson
Motors cost $23 each.
Transmissions cost $50 each.
UPS ground shipping is $6
UPS overnight shipping is either $20 or $20 plus the $6 stated above (I don't remember which).

The nice guy at Bosch knew exactly what I wanted, just as Andy pointed out in his original post.

-Kevin

Quick update: The motors came (yeah!) but they also sent two extra transmissions (ordered one, got three). They originally got the order wrong and I had to call 'em back to correct it (just as I hung-up, satisfied that we'd have three spare motors and an extra transmission, it dawned on me that the cost quoted to me was too low). Anyway, I just called 'em back to find out what happened (and what to do about it) and got a bit of attitude. A bit of advice: It might be a good idea to have them repeat the order back to you, should you want to purchase extra motors. Oh, and the overnight shipping was only $20.

-Kevin


All times are GMT -5. The time now is 04:38.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi