Chief Delphi - fabricated parts

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - fabricated parts (http://www.chiefdelphi.com/forums/showthread.php?t=16681)

JMastahFlex19

18-01-2003 19:00

fabricated parts

Fabricated parts...

:D :D :D :D

-Team19

GregT

18-01-2003 23:32

Thats it? My team is done (we were actually done 2 days ago)

evulish

19-01-2003 02:22

Ahh...the less popular but incredibly deceptive 'book on plank with wheels'...very tricky and complicated to pull off but VERY effective in the finals.

GregT

19-01-2003 11:16

Quote:

Originally posted by evulish
Ahh...the less popular but incredibly deceptive 'book on plank with wheels'...very tricky and complicated to pull off but VERY effective in the finals.

The tricky part was fitting all of the control system, battery, and motors on the bottom... we have very little ground clearence, and I doubt we will be able to go up the ramp, but we can go under, over, and through the bar.

We can also go under the ground clerance of most bots, just try and stop us from knocking down your precious stack.

Greg

HolyMasamune

20-01-2003 00:16

Quote:

Originally posted by GregT
The tricky part was fitting all of the control system, battery, and motors on the bottom... we have very little ground clearence, and I doubt we will be able to go up the ramp, but we can go under, over, and through the bar.

We can also go under the ground clerance of most bots, just try and stop us from knocking down your precious stack.

Greg

With wheels, i doubt you'll be able to make it under most robots, maybe a few, but probably not most. Also, do you have a picture of the bottom cuz right now it just looks like a board with wheels and casters on it :P

Cory	20-01-2003 00:19

/me laughs

he was making a joke. All it is is a board on wheels :D

hehehehe

Cory

All times are GMT -5. The time now is 17:29.