Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   Fuses (http://www.chiefdelphi.com/forums/showthread.php?t=16698)

jdawson 19-01-2003 08:34

Fuses
 
One of the fuses went bad on the robot controller (black round ones). Can anyone tell me where I can buy these? Are they available at Rdio Shack?

Thanx in advance for any help
Joel Dawson
Mentor Team #910

Ian W. 19-01-2003 08:46

make sure it's pushed in all the way. at one competition, we took our robot out for a match, and the fuse error light was on. we were confused, cause it had been fine at the last competition (we went to three last year), and no one had touched it since. a technician came over, spent 5 minutes trying to figure out what was wrong, and came to the conclusion that one of the fuse leads had popped out somehow. 3 seconds later, he bent the lead so it was straight again, popped it back in, and everything was working.

if that doesn't work, i would suggest talking to innovationfirst, as they would know exactly what fuse you need.

Al Skierkiewicz 19-01-2003 09:33

Check in Digikey Catalog Page 961

Matt Reiland 19-01-2003 09:55

A fuse pack for the controllers is available on the Innovation First website also

jdawson 20-01-2003 15:15

Found them
 
Thaks Matt found them at Innovation First.
Wonder why it blew though?

Matt Reiland 20-01-2003 15:23

Jdawson,
which of the four blew, that may lead you to what part of the controller caused it to blow. It has happened before to us, then it mysteriously went away.

Matt

jdawson 20-01-2003 16:05

F3 aux on the robot controller.

Al Skierkiewicz 21-01-2003 00:30

The Aux fuse is intended to protect external devices powered from the controller. The manual suggests it is for powering the gyro only. If you connected something instead of the gyro then it was either wired wrong or shorted the line intended to feed the gyro.

jdawson 21-01-2003 07:23

Thanks I am sure that is what happened. I did not notice that it said to connect the gyro to that one pin. That won't happen again..............

Al Skierkiewicz 21-01-2003 23:28

To paraphrase a well known axiom...
Those who fail to learn from their mistakes are disposed to relive them.

Element945 22-01-2003 11:31

WOW WE STILL HAVENT GOT OUR FUSES !!!!!!!

Jeff Waegelin 22-01-2003 12:45

Quote:

Originally posted by Element945
WOW WE STILL HAVENT GOT OUR FUSES !!!!!!!
First off, don't shout. All caps is the online equivalent of shouting. Second, Team Update #6 says that FIRST just received the 40A fuses, and four of them are being shipped out now.

Element945 23-01-2003 08:02

ITS NOT SHOUTING ITS ENTHUSIASM !!!

and since when did we listen to FBI ?

Element945 23-01-2003 13:17

BLAH !!!!!!


All times are GMT -5. The time now is 10:16.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi