Chief Delphi - visual signals from operator allowed?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - visual signals from operator allowed? (http://www.chiefdelphi.com/forums/showthread.php?t=16778)

Curtis Williams

22-01-2003 20:27

If you use other sensors from digikey you might be breaking rule C29. The next-to-last bullet states

Quote:

Custom Circuits may not:

-Be used for wireless communication, such as sending or receiving a signal to and/or from the alliance station.

GregT

23-01-2003 20:11

I got at least 50+ feet out of a bike reflector.

There is a "sensitivity" knob on the back of the sensor, make sure it's turned all the way to the "+" side.

Greg

All times are GMT -5. The time now is 01:12.

Page 2 of 2

Show 100 post(s) from this thread on one page