EDU RC and auton_mode
 

It seems that the EDU robot controller does not recognize the PB_mode bits. We have a working dongle, but the auton_mode bit (which is defined in the default EDU code) is stuck on 0.
Has anyone had success/failure with switching an EDU robot into autonomous mode using the competition port dongle?

I think the EDU bot will support a competition port dongle. i haven't had time to try it but I think I will soon. I would check the dongle again and debug auton_mode. Otherwise set the team number 0000 and run it that way.

n[ate]vw,

Check your wiring and programming. The dongle and mode bits work on our EduBot

Tim Tedrow