Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   drill motor mounting (http://www.chiefdelphi.com/forums/showthread.php?t=17038)

whynot 27-01-2003 11:41

drill motor mounting
 
While taking inventories of our parts, the drill motor mounting bracket fell off a table and broke. I just want to know if there is anybody out there who has a mounting bracket that they are not using. Also, in our kit there was only one left hand bolt that goes into the drill motor transmission. If someone can let me know where I can get another one of those, I would appreciate it.

Greg Needel 27-01-2003 12:34

in the book some where it talks about buying extra parts from frist so I would look for that as for the lefthand screw I would order them from MSC and order extras cause you can;t find those at lowes

Richard Wallace 27-01-2003 16:05

To get the reverse screws go to your nearest Skil Bosch service center. The part number is 2610 908 940. Should be $0.55 each. For other drill parts see the link below, or order directly from Bosch by phoning 908.769.8208.

http://www.toolpartsdirect.com/cgi-b...bosch/3360.561

The mounting brackets are made for FIRST by MMH. They can sell you new ones using an order form that you can get on the FIRST site.

nosvamos 03-02-2003 08:24

Lefthand bolts for the drill motors can be purchased from a
Bosch or Skil Power Tool Store.

Ken
Team #557


All times are GMT -5. The time now is 17:02.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi