Chief Delphi - victors

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - victors (http://www.chiefdelphi.com/forums/showthread.php?t=17460)

great_one411

05-02-2003 17:10

victors

How do you connect the pins from the victors to the robot controller, specifically which pin location 1-8.:confused:

Andrew Rudolph

05-02-2003 19:07

You need to look through FIRSTs documentation on usfirst.org and innovation first at firstrobotics.com

but for now...You use pwm cables(3 strands with a little plug, make sure u put them in correctly, the rc says which pin goes to which color) , you plug them into whatever pin you want look at your code.

Katie Reynolds

05-02-2003 22:24

Quote:

Originally posted by Andrew Rudolph
but for now...You use pwm cables(3 strands with a little plug, make sure u put them in correctly, the rc says which pin goes to which color) , you plug them into whatever pin you want look at your code.

Just FYI, the PWM cables that came with this year's kit are red, white, and black.

- Katie

wwrye

06-02-2003 00:08

"The more you know"

If I'm not mistaken the PWM y-cables are yellow/red/black. The y-cables are used to send the same signal off one PWM output(on the RC) to two different speed controllers.

Al Skierkiewicz

06-02-2003 09:08

Please look here and download all the documents if you haven't already. You should keep them handy always.

http://www.innovationfirst.com/FIRST...ence_Guide.pdf

All times are GMT -5. The time now is 20:46.