Chief Delphi - default program

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - default program (http://www.chiefdelphi.com/forums/showthread.php?t=17489)

nick_champ_2

06-02-2003 11:03

default program

we are using the default program and the wheels keep spinning in reverse. please help us :(

FotoPlasma

06-02-2003 11:09

One solution, I believe, would be to switch the polarity of the motor at the speed controller. That is, unscrew the M+ and M- terminal leads, and swap them.

MikeDubreuil

06-02-2003 13:11

You might also want to trim out the joysticks.

There are small dials (potentiometers) on each axis of the joystick. If these dials are not centered than the motor will move even when the joystick is positioned in the resting center of the base.

- Mike

All times are GMT -5. The time now is 22:11.