Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   Image Discuss: Robot on Robot Action (http://www.chiefdelphi.com/forums/showthread.php?t=17667)

CD47-Bot 09-02-2003 23:23

Image Discuss: Robot on Robot Action
 

Cory 09-02-2003 23:25

Hmm was last years bot stationary, or were you pushing against it with this years? Like the tires =) same we used this/last year

Cory

Rick 09-02-2003 23:28

old bot on top new bot had to move it off. this was the result.

rust710 10-02-2003 07:37

Looks like an engeneer in the back ground about to have a heart attack.

Joe Matt 10-02-2003 10:14

That's not much. Last years bot is top heavy and is on the ramp. It takes someone who knows about 5 things of physics can figure out that it would be easy to tip that over. But other wise, good wheels.

Rick 10-02-2003 10:30

Quote:

Originally posted by JosephM
That's not much. Last years bot is top heavy and is on the ramp. It takes someone who knows about 5 things of physics can figure out that it would be easy to tip that over. But other wise, good wheels.
first of all I know a lil more than 5 things on physics. And i can say that bot is not top heavy. last time i checked air didn't weigh that much. That robot has never tipped over. and after this pic was taken the new robot was backin off and that old one righted itself. Maybe this picture doesnt prove the power we have. We'll just have to run your bot over later.

Joe Matt 10-02-2003 10:45

Quote:

Originally posted by Ricksta121
first of all I know a lil more than 5 things on physics. And i can say that bot is not top heavy. last time i checked air didn't weigh that much. That robot has never tipped over. and after this pic was taken the new robot was backin off and that old one righted itself. Maybe this picture doesnt prove the power we have. We'll just have to run your bot over later.
I'll take your word on this since you are on the team. I basied my assumption on other teams that had similar designs last year. All tiped over.

LizJJury 10-02-2003 12:46

hmmm.. this little robot seems to be a knocker with the "flag" and long pole. i am guessing you are going to knock over the stack and sweep with the "flag". am i close????

Cory 10-02-2003 13:02

Quote:

Originally posted by LizJJury
hmmm.. this little robot seems to be a knocker with the "flag" and long pole. i am guessing you are going to knock over the stack and sweep with the "flag". am i close????
Umm what are you talking about? I see no flag or pole. right now all they have shown us is a Chassis, theres no way we can tell what's going on top right now.

Ricksta: pushing a stationary bot off the top of the ramp is not very impressive, robots with very little power can do it. Back away from the ramp, and go full speed straight at the bot. Not to say you don't have a lot of power, but your test doesnt seem to show us much at all.

Cory

Madison 10-02-2003 16:13

The 2003 robot hit the side of the 2002 robot, climbed up, and tipped it.

Congratulations.


Edit: You? Rub things in someone's face? I'd never imagine such a thing. . . :rolleyes:

Rick 10-02-2003 16:17

i love all the sarcasm guys. keep it comin. just dont cry when i remember it all at champs.

Todd Derbyshire 10-02-2003 17:17

*Sarcasm There's no sarcasm*
 
Well if your saying its similar to last years drive train then hey you guys got a very nice bot. (Visions of RiverRage 6 comes to mind a nice bot just not powerful enough when it actually faces some competition!!)

(If anybody has pics of the finals of River Rage 6 and knows what I'm talking about post it on this thread).
See you in Manchester guys!!!!!!!!!!!!!!!!!!!!!!!

Mike Schroeder 10-02-2003 20:16

Quote:

Originally posted by Ricksta121
i love all the sarcasm guys. keep it comin. just dont cry when i remember it all at champs.
I will keep that i mind, although last year people said all most the same thing about your robot hmmm oh well

Jeremy_Mc 10-02-2003 20:51

pompous boasts dont get you anywhere. results get your name on the book...

*jeremy

Joe Matt 10-02-2003 21:31

Quote:

Originally posted by Jeremy_Mc
pompous boasts dont get you anywhere. results get your name on the book...

*jeremy

He did! She did this!! Awww....

Ok fine, sorry about the comment. It's just that I've seen bots turn over before on the wire mesh (and even on flat surface) so it's nothing huge, but still, sorry about that guys.

Wanna cookie?


All times are GMT -5. The time now is 02:14.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi