Chief Delphi - pneumatic wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - pneumatic wiring (http://www.chiefdelphi.com/forums/showthread.php?t=18121)

nick_champ_2

17-02-2003 19:17

pneumatic wiring

how do you wireall of the pneumatics

ark_1230

17-02-2003 21:20

First off, you need to be more specific, but I hope this helps.

The pnuematic pump and the solonoids will need to be powered through Spikes. The pump can only be on when the pressure switch is off (open). This is done in the programming.

The info about the pnuematic parts are in the pnuematics manual: http://www2.usfirst.org/2003comp/pne...anual_2003.pdf

The info about wiring the spikes is at: http://www.innovationfirst.com/FIRST...sersManual.pdf

Josh Hambright

18-02-2003 08:16

RTFM then post specific questions...

Andrew Schuetze

23-02-2003 01:21

Relay and code for pump control

[quote]Originally posted by ark_1230
[b]First off, you need to be more specific, but I hope this helps.

The pneumatic pump and the solenoids will need to be powered through Spikes. The pump can only be on when the pressure switch is off (open). This is done in the programming.

A bit more specific question:

Can someone direct me to an information source for which relay to use to control the pump and is there code already in the default program to control it's operation?

Thanks,

APS:yikes:

All times are GMT -5. The time now is 14:17.