Chief Delphi - pic: Drill transmition

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Drill transmition (http://www.chiefdelphi.com/forums/showthread.php?t=21158)

Matt Attallah

27-06-2003 13:16

Re: Globe

Quote:

Originally posted by Tytus Gerrish
I havent been able to take apart the globe, NO Screwes

Just get the plasma cutters...

Or just a really-really sharp hack saw and go to town!! :yikes:

team222badbrad

27-06-2003 13:26

Nah not even a plasma cutter or hacksaw...

Just find a really small drill bit and a drill.....

Taking apart a Globe just requires some time.

Drill away all 3 of those roll pins that connect the Globe motor to the Globe gearbox.

(you wont get it back together....)

:-)

Dave_222

27-06-2003 15:39

As my little buddy brad pointed out yes it does take some time it took the two of us close to 30 minutes to drill out those 3 pins. They are really long. I dont recoment this if you plan on using the globe again. On a different note the globe is actually a really fast motor with out the gear box.

Coco the Monkey

28-10-2003 08:52

This picture was useful for me, I'm using it to make a Bosch motor in Inventor. I'm planning on animating each peice in 3DS Max by itself, and then combining them into one working motor.

Tristan Lall

28-10-2003 09:23

Coco: if you get a chance, would you mind e-mailling me a copy of that Bosch motor in Pro/E, STEP, IGES format? (Address in profile, or PM me.)
Thanks.

All times are GMT -5. The time now is 23:39.

Page 2 of 2

Show 100 post(s) from this thread on one page