|
What do you give your machinists?
I'm assuming a lot of teams have a machinist who does a lot of the machining for random parts on the robot. So I wonder what teams (and team leaders) have done to thank these wonderful amazing folks....
-anton |
sammiches
|
Boy howdy I wish we really had a machinist to do some things. The only custom manufactured parts we've ever not made ourselves we paid for.
|
Our custom work is being done by a company owned by an alumni which is nice. But obviously we will thank him the same way we thank our other sponsors. Logo and link on the team web site. Logo on our t-shirts. The after it's over party. etc.
Machining is skilled and expensive work. Companies or individuals who do it for a FIRST team are valuable and appreciated sponsors as far as we are concerned. |
Machining Companies Sponsors Too
Same with us. We have different levels of sponsorship and we have our machining donors guote what it would have cost us. We use that as a means to determine what level of sponsor they are. I'll tell you this, most of our machining sponsors get their name on our t-shirts and one seems to donate enough machining time to get on our robot.
-Paul |
We've got good guys
Some of our machinists and techs are from Lockheed Martin. The place where they work is responsible for the AEGIS defense system on our Navy destroyers. They are a great bunch of guys.
|
On our team, the sudents first draw up the file in a 3d modeling software. Next, the drawing is either placed in a folder to be sent out to our technical college or printed off for teh shop.At teh Tech students from our team go out and d/l the file, convert it for use in mastercam, program the part, and then run the part on the machines themselves. The other ones which are able to be done manually are kept in house at our school, where prints are given to the students to machine up. Id say 95% of our machining work is done by students on the team, including CNC work. It also ahs been nice to have a full metal shop, including CNCs, right at our school. I am probably one of the most experianced machinists on my team, with this being my fourth year on the team, and am teaching everything i have learned to my younger teammates, in the hopes they carry on the tradition of building our robot. Not to say it is bad to farm out parts, but i definitely enjoy building the robot, as do many of my teammates. And our machinists get to watch our robot compete, to answer your question.
|
My team is lucky enough to have welding and milling capabilities in our shop. As well as having a lathe. The students spend pre-build time on learning to weld and use all of our other machines and we fabricate our own parts. Most of the work is done from drawings on paper, we don't use very much CAD in our designing.
|
Last year we did all the machining but for one part. We needed a custom gear made.
This year we have a couple of students and engineers doing the all the machining. Now if we can loose 20 lbs we will be all set :D Wayne Doenges |
our school has a great shop we do all of our custom parts there. the students do it all.
|
As an engineer and a machinist I can tell you one of the best things students can give: a thank you every now and then. Seriously when we are in the lab working really late to make sure parts are done for the next day, a student saying thanks goes a long way. Some people seem to thing a magic machinist cranks out parts in some other time zone but it takes alot of work.
Now what not to get a machinist: Are you done yet, (10 mins later)are you done yet, (5 mins later)are you done yet (That is a no-no), Whats taking so long its only a piece of metal we want held to tight tolerances? And also this weighs too much, you're going to have to make it lighter without taking any strength out of it. (Just kidding although I do hear that quite a bit) Just thank the people who are doing the work be it students, engineers, or machinists, it goes a long way. |
Tell me if i am wrong but only people over the age of 18 can use Milling machines and lathes right? I tried to get a job learning the lathe and the milling machine at age 17 and they could not accept me because of my age. However now i am one of 2 students that machines and my father is a machinist so i can ask him to do it if i cannot do it (ie gears and sprockets [oops did i give to much info about our robot this year]). Oh well, I hope everyone is still having fun!!!!
|
Re: What do you give your machinists?
Quote:
It brings a wide smile to their face, and seems to keep them regular too. :) (where-as us electrical types are more into grains and fiber....and the coders, well, they seem to fancy tofu) |
Bubblegum and Lollipops :D
|
Re: What do you give your machinists?
Quote:
|
We have a lathe and mill, and the students on our team operate them. If(when) we get behind, Dave may work on parts at his house/have students over to work on his mill and lathe when we can't be in the school. But we are a mostly student built bot.:)
Well, Little John runs the lathe most of the time, and the mill is used by more people. Those machines we do limit who is allowed to use. |
Quote:
Machinists are great. They solve all the little problems like converting non-standard gears to standard gears. The solution (well, my teams solution) is to wire edm a 17:1 (actually 166:9) gear, hard to do without talented machinists. |
Sorry if a bit offtopic, but it was well meaning when I started...
After the meeting ended today (at 5 after 8 hours) a group of us got pizza and went bowling. At 10 we stoped by Daves house and he as just finnished making replacement shafts for the drill motors!! Huzzah for workshops in garages, and don't mind random visits by teenagers late at night. We should have given him some food, but that would have taken time away from his work. He can sleep in two and a half weeks.
We love our enginners and Dave. (Dave is wierd and doens't count as an engineer) |
Quote:
-dave ------------------------------------------------ Buckaroo Bonzai was right. |
Quote:
|
Quote:
......Wet |
Quote:
|
COOKIE
|
Oh man Dave
--------------------------------------------------------------------------------
Originally posted by dlavery I realize that I am opening myself up for all sorts of abuse, but I just have to ask: what do I count as? -dave ------------------------------------------------ Dave......Honestly, I would really think you knew better then to leave something like that open to me. It's really late though, so I'll just leave it at....You count as whatever you want to count yourself as, as long as you properly convert your measuring system....:D |
I should have mentioned that Carolyn and Adam are not allowed to answer. Wetzel will be forced into full servitude tomorrow, resharpening all our drill bits with a dull nail file.
-dave ----------------------------------- But Cap'n she canna goe enny fastah! |
LOL.....but why would you give HIM anything.
Personally i would make him use his teeth:D You have to admit the would be hilarious ;) |
Well, after confirming that you really did burn your hand, I have to say, Dave, you're a fool... but that's said with the utmost admiration from someone who greatly appreciates fools.
|
| All times are GMT -5. The time now is 11:23. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi