Chief Delphi - 2003 Drills and Chips

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - 2003 Drills and Chips (http://www.chiefdelphi.com/forums/showthread.php?t=22254)

Chris

12-10-2003 12:26

2003 Drills and Chips

Does anyone know where I can purchase 2 2003 Chip motors (Standard output shaft) and 2 2003 Drill motors? I looked this information up on the FIRST website and struck out at both S&B Tool for the Drills and MMH Ventures for the Chips. I Search old Delphi threads and couldn't find this information. Any help would be appreciated.

Chris C.
Team 229

generalbrando

12-10-2003 15:01

Is that the company in the documents for ordering the drills? I remember ordering replacement drills and gear boxes and it seems like we ordered from Bosch directly, which makes sense since we ordered the bosch gear boxes from the same place. I don't know how easy it will be for you to get them from bosch directly now that the season is over. When I called and told them I needed the drill and gear sets for FIRST it seemed like they had something special set up. Anyway, I hope that helps. Good luck.

sanddrag

12-10-2003 18:44

Andy Baker had a post a while back on where to get the drills. Also, I found this place http://www.toolpartsdirect.com/cgi-b...bosch/3360.561

UlTiMaTeP

12-10-2003 19:02

Re: 2003 Drills and Chips

Quote:

Originally posted by Chris
Does anyone know where I can purchase 2 2003 Chip motors (Standard output shaft) and 2 2003 Drill motors? I looked this information up on the FIRST website and struck out at both S&B Tool for the Drills and MMH Ventures for the Chips. I Search old Delphi threads and couldn't find this information. Any help would be appreciated.

Chris C.
Team 229

Because the chips came from a car jack, I dont know if there on the market OEM by themselves... Try calling Atwood directly

All times are GMT -5. The time now is 07:52.