Chief Delphi - Speed of CIM Motors?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Speed of CIM Motors? (http://www.chiefdelphi.com/forums/showthread.php?t=22336)

Geoff Warner

18-10-2003 13:29

Speed of CIM Motors?

Anybody know the Speed in RPM's of the CIM/Atwood motors?

-Geoff

Madison

18-10-2003 13:32

Re: Speed of CIM Motors?

Quote:

Originally posted by Geoff Warner
Anybody know the Speed in RPM's of the CIM/Atwood motors?

-Geoff

Their free speed at 12V is approximately 5500 RPM with a stall torque of 2.2 Nm

Tytus Gerrish

18-10-2003 13:56

if i had a dollar for every time ive heard that question...

We would be going to 3 regionals this year

Matt Krass

18-10-2003 13:57

Here are the motor specs on Team 696s site, they're listed as 2002 specs though so I'm not sure how valid they are. Use With Caution. Can somebody from 696 tell us if those are valid?

sanddrag

18-10-2003 14:09

These specs are valid to the best of my knowledge. Note that they are the 2002 motor specs. These were all taken from the Joe Johnson motor spreadsheet which is also on our site linked off of that page.

All times are GMT -5. The time now is 15:36.