Chief Delphi - Analog Inputs

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Analog Inputs (http://www.chiefdelphi.com/forums/showthread.php?t=2307)

316_programer

04-02-2002 15:34

Analog Inputs

Hello all,
I have a problem, I don't know how to get data from the analog inputs. any info. would be helpful.

Matt Reiland

04-02-2002 20:12

You need to first wire it according to the manual (correct pins +5, GND, and the signal) Go to the initialization area and for the sensor you want to read make it CON 1. Then add the sensor you are using to the serin command (Sensor 1 and up). Presto you have the data.

email me if you have any problems

Matt

Lloyd Burns

05-02-2002 05:53

Lloyd Burns

Check out this little tutorial:

How to enable the RC Analog Inputs

http://www.team188.com/cr/forum/tech...sages/51.shtml

All times are GMT -5. The time now is 10:34.