Chief Delphi - Bosch Drill Motor

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)

- - Bosch Drill Motor (http://www.chiefdelphi.com/forums/showthread.php?t=23079)

rmmlg

12-12-2003 11:16

Bosch Drill Motor

Does anyone have either a CAD model of the Bosch Drill motor or its dimensions? Either would be greatly appreciated.
Thanks,
Ryan

petek

12-12-2003 11:48

Re: Bosch Drill Motor

Go to www.firstcadlibrary.com

Ed Sparks

12-12-2003 12:50

Re: Bosch Drill Motor

Quote:

Originally Posted by rmmlg

Does anyone have either a CAD model of the Bosch Drill motor or its dimensions? Either would be greatly appreciated.
Thanks,
Ryan

I should have a model posted shortly of last year's drill motor along with some other new models and some IGES translations - probably by Monday morning.

Tristan Lall

12-12-2003 12:52

Re: Bosch Drill Motor

Actually it's not there yet; Ed Sparks said he was going to make one in the near future. He does have a CAD of the pinion of that motor, though (10 tooth, 0.7 module, 20° pressure angle).

Edit: Speak of the devil--he beat me to it....

Ed Sparks

15-12-2003 08:07

Re: Bosch Drill Motor

The new Bosch motor is posted in the Motors Library. The pinion gear will be posted in a day or so. I'm working on an i-Gear model that will generate just about any spur gear you would want with optional hub and key.

Tdevree

16-12-2003 17:16

Re: Bosch Drill Motor

Quote:

Originally Posted by Ed Sparks

Do you have a general date that you will finish the i-Gear model?

Ed Sparks

16-12-2003 22:43

Re: Bosch Drill Motor

Quote:

Originally Posted by Tdevree

Do you have a general date that you will finish the i-Gear model?

I actually finished it today but I want a day or two to see if I can break it. Look for a post around Thursday-Friday. :ahh:

rmmlg

17-12-2003 14:33

Re: Bosch Drill Motor

Thanks for putting the motor up on the library. That helped us a lot.

All times are GMT -5. The time now is 09:13.