Specs on Drill Motor Gear
 

What are the specifications on the gear that is pressed on the gear motor?

Search please
 

Try searching on "drill motor gear" see what you get.

About 40 messages, at least 3 of which have the information you want.

Joe J.

after a search...
 

After doing a quick search...

"Before you ask, the drill motor is a standard, 0.7 module, 20 degree pressure angle, full depth gear. " -Joe J

http://www.chiefdelphi.com/forums/sh...&threadid=1635

Should've been part of the newsletter, but some how I managed to skip that... Oh well. Posted in here so people can see it for a while before this post will be pushed back by new ones.

Speaking of the drill motors.
Does anyone know the thread size of the center of the tranny coupling? We can see it's a left-handed thread but we have no screws with left-handed threads. We are mounting a gear directly to the output shaft, but need a screw to secure it.
Any help would be appreciated.

Wayne Doenges