Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Ball coral (http://www.chiefdelphi.com/forums/showthread.php?t=24027)

Jeremy 17-01-2004 21:51

Ball coral
 
does anybody know how high the bump leading into the ball coral is? after viewing photos of the field I came across a bump leading into the ball coral so if anybody knows how big this bump is please let me know

ngreen 17-01-2004 21:55

Re: Ball coral
 
It is in Q&A, 1/4 to 1/2 inch I think. It is a piece of angle. But they say it doesn't affect how the ball move through the corral.

Jeremy 17-01-2004 22:29

Re: Ball coral
 
According to these pictures, it looks like more than an angle.

Has anyone seen specific dimensions or specific materials used?




ngreen 17-01-2004 22:36

Re: Ball coral
 
Here it is:

Section: 3.2.4 Status: Answered Date Answered: 1/16/2004
Q: Is there a seamless transition between the playing field and the ball chute? The kickoff video looks like there was a 1/2 inch steel bar or some structural support there.

A: No. There was an angled piece of 1-1/2" x 1-1/2" aluminum in the opening with the outside of the angle facing up (~1-1/8"). In the final configuration, there will be a vertical piece of 1/4" thick aluminum with the same vertical dimension as before. The ball dynamics are the same in either configuration. Drawings will reflect this change.

Jeremy 17-01-2004 22:43

Re: Ball coral
 
what is that black rubber looking thing on top of the aluminum?

Can you point me to the drawing the he talks about?

ngreen 17-01-2004 22:48

Re: Ball coral
 
I'm assuming the drawings the playing field. Also I would assume the black material would be a rubber-like material. Possibly to keep the rubber balls from reacting off of it.


All times are GMT -5. The time now is 15:10.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi