Chief Delphi - festo solenoid

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - festo solenoid (http://www.chiefdelphi.com/forums/showthread.php?t=24028)

Scott358

21-01-2004 10:44

Re: festo solenoid

The operating instructions, which were shipped with the valve, are now available at the Festo website.

http://www.festo.com/INetDomino/us/e...8b004fc634.htm

There is information how the valve works on that sheet, which hopefully answers questions regarding which ports are active when.

Regards,
Scott358

Greg Ross

21-01-2004 11:58

Re: festo solenoid

Aren't these the same instructions as last year's, which someone said does not apply to this year's valve?

Scott358

21-01-2004 20:52

Re: festo solenoid

The link was updated with the new valve info as of yesterday.

Regards,
Scott358

Fred Hord

21-01-2004 22:47

Re: festo solenoid

Quote:

Originally Posted by maxgebhardt

so one of my freshman discarded my festo manual with the instructions of how to wire it... so now I'm trying to wire it and my first instinct is RTFM, but its gone. I cant seem to find instructions on their site, so I was wondering if there is an online site. I know there are little numbers on 3 of the 4 contacts, the 4th contact is the ground, and has the ground symbol. the other three are numbered, I cant recall now. somebody please if you can direct me to an online manual, or can tell me how to wire it so that it can function as a single solenoid.

positive to #2 and negitive to #1

Chris Fultz

21-01-2004 23:06

Re: festo solenoid

You should also check the forum on multi-positioning with solenoids to be sure you stay under 60 PSI.

All times are GMT -5. The time now is 12:19.

Page 2 of 2

Show 100 post(s) from this thread on one page