Chief Delphi - Anyone missing as many parts as we are?

Team 801 just recieved our kit of parts today and we are missing a lot of stuff.
Blue Box:
Control System accessories:
- Relay Module (spike)

missing 4

- Power Supply for Operator Interface missing 1

- Speed Controller (victor 884) missing 4

Control System Box:
- Radio Modem for Robot Controller missing 1

- Radio Modem for Operator Interface missing 1

- Robot Controller missing 1

- Operator Interface missing 1

Sensor Bag:
- Ir Beacon- victor board missing 1

- Current Sensor – Tantalem Capacitors missing 2

- Ir Beacon- Fet’s missing 2

- Ir Beacon Led’s missing 10

- Ir Beacon- resistors missing 8

- Ir Beacon – 3pin connectors missing 2

- Current Sensor missing 2

- World Beam Diffuse sensor w/screws missing 2

- Ir Beacon- photo detector (receiver) missing 5

- Current Sensor- Printed Circuit Board missing 2

Pneumatics – SMC:
- Pneumatics Kit, double solenoid base ported valve, SMC missing 2

- Pneumatics Kit, flow control, SMC missing 6

- Pneumatics Kit, fitting, straight ¼” tube, SMC missing 20

- Pneumatics Kit, fitting, 90 Elbow 1/” tube, SMC missing 20

- Pneumatics Kit, Tee Union ¼” tube, SMC missing 5

- Pneumatics Kit, Fitting, Male Run T 1/8 npt~1/4 tube SMC missing 5

- Pneumatics Kit, ¼” OD tubing, SMC missing 1

Seat/Window Bag:
- Nippon-Denso Motor, Window, Right missing 2

SEPARATE BOX:

1. Documentation Bag:

- FedEx Pouches

missing 2

- Discovering Fluid Power CDROM

missing 1

RED BOX:

1. Loose:

- Valve- Single Solenoid missing 1

Is there anyone else out ther missing as much stuff as we are? The down side to this is that we just recieved our kit today. (monday the 19th) And now we have to wait another week or more to get our missing parts.
Drew Hopman