Bimba Pneumatics CAD site
 

I found this useful, so you all may think the same.

There is a nice site at Bimba that will let you download CAD files for their rotary actuator and cylinders.

Here is the link. The cylinders are under "non-repairable stainless steel cylinders" and the rotary actuator is under "pneu-turn rotary actuator".

Enjoy!

Andy B.

Re: Bimba Pneumatics CAD site
 

Were you able to download anything? I put in a part number (178-DP for the 1-1/2 inch bore 8 inch stroke cylinder) and it doesn't recognize it for native ProE (which would be great for me). I tried a couple other part numbers and no luck - they do work on other parts of the website such as searching for cost so it looks like the part numbers are good.

Re: Bimba Pneumatics CAD site
 

I used it for the rotary actuator (PT-017090-M), and it worked really well. I downloaded a stp file, but it seemed like they had every type of file imaginable.

Andy B.

Re: Bimba Pneumatics CAD site
 

I was using Bimba's CAD models just a few days ago. Very nice :)

Gary: You could always just download the IGES format.

Cory

Re: Bimba Pneumatics CAD site
 

Except I lose the parametrics when I go to IGES. If I could import it in ProE I could setup a parameter and the stroke position would change based on the position of the end points (or vice versa). I have a cylinder in there now with that feature, but it would be nice to have the other stuff located correctly such as ports

I'll check the other formats -step and IGES usually come in pretty clean but not parametric.