Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   pic: please help us please mortals (http://www.chiefdelphi.com/forums/showthread.php?t=24307)

CD47-Bot 24-01-2004 13:03
pic: please help us please mortals
 

Rickertsen2 24-01-2004 13:05
Re: pic: please help us please mortals
 
Looks like it could be an inline fuse holder. The rest of the pic would help. Btw exactly what is the story behind all this?

CyberWolf_22 24-01-2004 23:08
Re: pic: please help us please mortals
 
I went and found the picture and I think it is the stud that came in the kit but I don't remeber getting one in our kit.

Kevin A 24-01-2004 23:35
Re: pic: please help us please mortals
 
I agree with Rickertsen2 - Looks like it could be an inline fuse holder.

Ryan Curry 25-01-2004 00:06
Re: pic: please help us please mortals
 
It very well could be an inline fuse holder, but it also could just be a junction/splice of 3 lines of the 10AWG. It appears that there is one line going to the main breaker and then it juncitons to three others at the center of the picture. These wires should all go to either 40amp breakers, or to the fuse block so it would kind of be pointless for it to be an inline fuse.

-Rc

WakeZero 25-01-2004 11:03
Re: pic: please help us please mortals
 
It is the battery disconnects with heat shrink around them :yikes:


All times are GMT -5. The time now is 05:39.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi