Chief Delphi - How many motors are you using to drive?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - How many motors are you using to drive? (http://www.chiefdelphi.com/forums/showthread.php?t=2447)

Mike Norton

14-02-2002 20:16

http://www.chiefdelphi.com/forums/pi...rrow=4&trows=3

we use 4 motors take a look.

max 300rpm with 24-36 gear to the drive

quick with lots of power.

GregT

15-02-2002 22:41

Quote:

Originally posted by BSMFIRST
Our 160 lb engineer got down on his knees behind the robot and was pulled around the floor. This is with the robot weighing only 57 lbs (trial weight). That should be enough traction

What was he wearing, like teflon pants?

My team's 4 motor drive dragged a 190 pound student around on his stomach.

www.startateam.com/639 for a video, we weight more though so

RobDeCotiis

18-02-2002 09:30

2 drill and 1 globe... 2 drill for drive, one globe as the trans. :) very light, very fast, very nice

mtaman02

16-10-2002 21:24

Our robot Dorothy requires 2 Drill motors for drive and i think a window motor for a tether. she managed to pull 2 goals in a straight line but had a problem turning. one of the many problems we had with our drivetrain. next year will be a tranny with hopefully a stronger motor then the chalupa / drill motor

All times are GMT -5. The time now is 22:27.

Page 2 of 2

Show 100 post(s) from this thread on one page