Chief Delphi - USB to 9-pin serial port (HELP!!)

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - USB to 9-pin serial port (HELP!!) (http://www.chiefdelphi.com/forums/showthread.php?t=24606)

n00b	31-01-2004 17:03

USB to 9-pin serial port (HELP!!)

Just wondering if it was possible to convert the 9-pin to USB with an adapter because most of our computers do not have the 9-pin serial port. Any suggestions and advice would be helpful.

~n00b

Rickertsen2

31-01-2004 17:17

Re: USB to 9-pin serial port (HELP!!)

Quote:

Originally Posted by n00b

Just wondering if it was possible to convert the 9-pin to USB with an adapter because most of our computers do not have the 9-pin serial port. Any suggestions and advice would be helpful.

~n00b

Do you mean USB to serial? Absolutely. Most computer stores sell adapter that are fully compatible. This has been posted here MANY other times.

KevinB

31-01-2004 17:37

Re: USB to 9-pin serial port (HELP!!)

Don't buy the $3.99 USB to serial converter that is going on eBay.

It does work .... but only for 2-4 minutes before it crashes Windows (even 2000 and XP --- you have to fully reboot!)

:D

Pat Fairbank

31-01-2004 17:52

Re: USB to 9-pin serial port (HELP!!)

I bought this adapter, and it works fine. It's $16.99.

KevinB

31-01-2004 18:34

Re: USB to 9-pin serial port (HELP!!)

Quote:

Originally Posted by Pat Fairbank

I bought this adapter, and it works fine. It's $16.99.

Does it work fine with the Dashboard? My adapter works fine for just downloading code ... its high-throughput situations like the dashboard where it fails.

Pat Fairbank

31-01-2004 19:01

Re: USB to 9-pin serial port (HELP!!)

Quote:

Originally Posted by KevinB

Does it work fine with the Dashboard? My adapter works fine for just downloading code ... its high-throughput situations like the dashboard where it fails.

Hmm... I'm not sure - I haven't used the Dashboard yet this year, and probably won't get a chance to for a while.

Gusman1188

31-01-2004 20:55

Re: USB to 9-pin serial port (HELP!!)

Ya i've used a usb to 9 pin last year and it worked great. This year the code gets corrupted and never works right. Instead it locks the RC into prog. mode and the only way to get it out is pressing something like reset then program then wait for the light to blink yaddaaa yaddaa yaddaa.. works great for dashboard though.

petek

31-01-2004 21:11

Re: USB to 9-pin serial port (HELP!!)

We're using a Keyspan USA-19HS, which works fine. Stay away from the Belkin USB-serial adapter - we started out with one and it transferred at about one bit/sec.

n00b	31-01-2004 22:26

Re: USB to 9-pin serial port (HELP!!)

hey everyone, thank you so much! my team is only a second year, and last year we didnt do so well (from what i hear) -_-;
Rickersten: i have not been a member of the forums that long and i dont have the time to check that often, most recently because of finals, usually i have other activities as well.

again, i appreciate the help and advice...

Jessica Boucher

01-02-2004 14:29

Re: USB to 9-pin serial port (HELP!!)

Quote:

Originally Posted by KevinB

Don't buy the $3.99 USB to serial converter that is going on eBay.

It does work .... but only for 2-4 minutes before it crashes Windows (even 2000 and XP --- you have to fully reboot!)

:D

I haven't had any issues with that adapter, and I'm running off of XP too.

Joe Johnson

01-02-2004 21:25

Re: USB to 9-pin serial port (HELP!!)

There have been several threads on this. Search for "Bafo" I recommend the Bafo Technolgies' BF-810

I have had good success with it.

Joe J.

All times are GMT -5. The time now is 02:20.