Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Mobile Goal measurements (http://www.chiefdelphi.com/forums/showthread.php?t=24730)

CallMeBob 03-02-2004 18:32
Mobile Goal measurements
 
On the mobile goals, how big is the lip? We haven't been able to find any measurements of it.

Sachiel7 03-02-2004 18:39
Re: Mobile Goal measurements
 
The angle iron is 1"x1". So, from the floor to the top of the lip is 6". From the floor to the main platform of the goal is 5". Hope that helps.

CallMeBob 03-02-2004 18:41
Re: Mobile Goal measurements
 
thanks

CallMeBob 03-02-2004 18:47
Re: Mobile Goal measurements
 
Where did you find that measurement?

Wetzel 03-02-2004 20:35
Re: Mobile Goal measurements
 
I recall reading somewhere the dimensions of the lip, including the thickness of the diamond plate, but can't find it.


Wetzel

Sachiel7 04-02-2004 09:15
Re: Mobile Goal measurements
 
Look at the materials list for the mobile goal. 1x1x1/8" Steel Angle is listed for the lip.


All times are GMT -5. The time now is 21:35.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi