wire from competition port?
 

:confused: does anyone know what the power supply is from the competion port to the operator interface? if not, what guage wire is it?

Re: wire from competition port?
 

You are not allowed to draw/supply power to the competition port.

Re: wire from competition port?
 

And if you did draw/supply power, you might fry it. I talk from expierience. Besides, they don't tell us anything other than the three switches.

Re: wire from competition port?
 

this page has everything you need to know - esp those three magic words "Void any warrenty"

http://www.innovationfirst.com/FIRST...nout_Guide.PDF

Re: wire from competition port?
 

We built a 9V battery adapter for the competition port. Just connect power to Pin 1 of the competition port and ground to pin 8.

Yes, I suppose it technically voids your warranty, but who's gonna know?

Re: wire from competition port?
 

This is the 3rd question you've asked on this topic, and you've gotten the same answers each time. Maybe if you tell us exactly what you'd like to do then we might be able to help more.

So far, as best I can tell, you'd like to hook up a VFD for feedback to your drivers, and several people have told you that you'll need your own power source for it. Is there more to it than that?

Re: wire from competition port?
 

Why? there is a perfectly good power connector 4" away from it. I much prefer to use known things, then undocumented "features" which could change.

Re: wire from competition port?
 

Err ... the reason we did it is because it could be screwed into the competition port ... we had problems with the other one coming unplugged. :)

(note .... I now realize that I answered a question totally different from the one that was asked in the first place .... so I apoligize for the added confusion.)