Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Compiler Help Needed (http://www.chiefdelphi.com/forums/showthread.php?t=24881)

Darkman_X000 07-02-2004 11:16

Compiler Help Needed
 
Ok guys, what is the deal!? I am getting the following errors when I compile:
Code:

OUTPUT
MPLINK 3.40, Linker
Copyright (c) 2003 Microchip Technology Inc.
Error - symbol 'axelWidth' has multiple definitions.
Errors    : 1

BUILD FAILED: Sat Feb 07 11:04:01 2004

This is really annoying because it does not tell me where the other definitions are. In C++, and in this compiler, if I define the same thing twice explicitly, it tells me where the previous definition is. Here is a sample of my code:
Code:

UserUtilities.h
#ifndef USERUTILITIES_H
#define USERUTILITIES_H

#include "bool.h"

float axelWidth=.725;
float wheelRadius=.105;
int clicksPerRevolution=16;

bool newValue(int *staticVar, int dynamicVar);
float thetaDegrees(int c);
float thetaRadians(int c);
float Forward(int c);

#endif

UserUtilities.c
#ifndef USERUTILITIES_C
#define USERUTILITIES_C

#include "bool.h"
#include "UserUtilities.h"

bool newValue(int *staticVar, int dynamicVar)
{
       
        if (*staticVar==dynamicVar)
        {
                *staticVar=dynamicVar;
                return true;
        }
        else
        {       
                return false;
        }
}

float thetaDegrees(int clicks)
{
        extern float axelWidth;
        extern float wheelRadius;
        clicks*=22.5;
        clicks=clicks*wheelRadius;
        clicks/=(float)axelWidth;
        return clicks; //22.5*(float)wheelRadius*clicks/(float)axelWidth;
}

float thetaRadians(int clicks)
{
        extern float axelWidth;
        extern float wheelRadius;
        clicks*=3.1415926;
        clicks=clicks*wheelRadius;
        clicks/=8*axelWidth;
        return clicks;
}

#endif

Note: these are the only files that contain the definitions of these functions and varibles. There are NO duplicate names or any of that.
WHAT IS GOING ON!?!?!?!?!?!?!?!?!?
Clearly, including the file multiple times is prevented by the preprocessor #ifndef, #define, #endif statements, but it is acting like it just disregards those...

Mike Betts 07-02-2004 11:29

Re: Compiler Help Needed
 
Slow down and look at what you are doing.

You defined axelWidth in userutilities.h and then included userutilities.h in userutilities.c... This means that axelWidth is defined as a float.

Now you redefine axelWidth as an external variable in userutilities.c meaning that some OTHER module has defined axelWidth. This is a double declaration and is only the tip of the iceberg... I see a bunch. i.e. you include bool.h multiple times...

Also, take a few minutes and see various threads about float variables and implicit initializations... You are going down a very dangerous road.

Regards,

Mike Soukup 07-02-2004 11:31

Re: Compiler Help Needed
 
Quote:

Originally Posted by Darkman_X000
Note: these are the only files that contain the definitions of these functions and varibles. There are NO duplicate names or any of that.
WHAT IS GOING ON!?!?!?!?!?!?!?!?!?
Clearly, including the file multiple times is prevented by the preprocessor #ifndef, #define, #endif statements, but it is acting like it just disregards those...

The problem is actually with the line "extern float axleWidth". Since you're including the header that has the declaration of "axleWidth" there is no need to re-declare it inside your function. 'extern' is only used when you have a global variable defined in another file.

From the names of your variables & the way you use them, it looks like those are values that will never change while your code is being executed, ie a constant. If so, there is no need to use a variable to store the values, use a #define instead:

Code:

#define axelWidth  .725
#define wheelRadius  .105
#define clicksPerRevolution  16

Post more questions if you have them.

Darkman_X000 07-02-2004 12:15

Re: Compiler Help Needed
 
Ok, I just replaced what I had before with:
Code:

#define axelWidth  .725
#define wheelRadius  .105
#define clicksPerRevolution  16

and I have deleted the externs. Now the compiler has no trouble with "axelWidth". Instead it says:
Code:

MPLINK 3.40, Linker
Copyright (c) 2003 Microchip Technology Inc.
Error - symbol 'newValue' has multiple definitions.
Errors    : 1

BUILD FAILED: Sat Feb 07 12:05:03 2004

I wrote the function prototype in UserUtilities.h and the actual function definition in UserUtilities.c. There should be no conflicts here because prototypes ARE allowed.

Each time I fix a problem with one function or variable name in the set of files, it has a problem with the next one down the line.

Please consider that because bool.h has the necessary preprocessor statements, including it multiple times should not be a problem... right? Isn't that the primary use of #ifndef, #define, and #endif structures in header files?

I also tried to delete the #include "userutilities.h" line from UserUtilities.c after making the above changes, but then it said that axelWidth and wheelRadius were not defined. Can I use extern with a variable that was #defined?

Here is the updated version of my files:
Code:

UserUtilities.h
#ifndef USERUTILITIES_H
#define USERUTILITIES_H

#include "bool.h"

#define axelWidth .725
#define wheelRadius .105
#define clicksPerRevolution 16

/*float axelWidth = .725;
float wheelRadius = .105;
int clicksPerRevolution = 16;*/

bool newValue(int *staticVar, int dynamicVar);
float thetaDegrees(int c);
float thetaRadians(int c);
float Forward(int c);
void move(float distance);
void turnLeft(float degrees);
void turnRight(float degrees);

#endif

UserUtilities.c
#ifndef USERUTILITIES_C
#define USERUTILITIES_C

#include "bool.h"
#include "UserUtilities.h"

bool newValue(int *staticVar, int dynamicVar)
{
       
        if (*staticVar==dynamicVar)
        {
                *staticVar=dynamicVar;
                return true;
        }
        else
        {       
                return false;
        }
}

float thetaDegrees(int clicks)
{
        clicks*=22.5;
        clicks=clicks*wheelRadius;
        clicks/=(float)axelWidth;
        return clicks; //22.5*(float)wheelRadius*clicks/(float)axelWidth;
}

float thetaRadians(int clicks)
{
        clicks*=3.1415926;
        clicks=clicks*wheelRadius;
        clicks/=8*axelWidth;
        return clicks;
}

#endif


Darkman_X000 07-02-2004 12:26

Re: Compiler Help Needed
 
Quote:

Originally Posted by Mike Betts
Take a few minutes and see various threads about float variables and implicit initializations... You are going down a very dangerous road.

So, after the prescribed research, I still do not understand the "dangerous road" of floats and implicit initializations. Please enlighten me.

Thanx in advance.

Random Dude 07-02-2004 17:45

Re: Compiler Help Needed
 
Quote:

Originally Posted by Darkman_X000
So, after the prescribed research, I still do not understand the "dangerous road" of floats and implicit initializations. Please enlighten me.

Thanx in advance.


Well, the issue with floats is that this micro does not have a Floating Point Unit. So, while on your PC the FPU would quicky preform any math involving floats, that all has to be emulated in software on this micro. That is bad becuase that emulation is fairly complex and could potentially slow down your program considerably, especially if you use alot of floating point numbers.

The concerns about the implicit initializations, is basically that normally on microprocessors, the line

int i = 5;

may not automatically initalize i = 5. Though that is really a moot point in this case since IFI has a routine that does initalize the variables for us. (in ifi_startup.c for those who haven't seen it.)


-----------------------
No, you can't use extern with #define. #define isn't actually a variable, what it means, is before the code is complied (in the pre-processor), the any time the first item after the #define is found, it is replaced with the second. So:

#define PI 3.1415926538
int C, R = 3;
C= 2*PI*R;


Becomes (after the pre-processor, but before the actuall compiler)

int C, R = 3;
C= 2*3.1415926538*R;



So if you just put the

#define axelWidth .725

in one header file, that you include everywhere, you can use axelWidth with no other effort.


------------------------------

Jeff McCune 07-02-2004 19:10

Re: Compiler Help Needed
 
As an example, when using a microcontroller, using this:

#define PI (22 / 7)

is *considerably* faster than using 3.14159... and it gives a fairly decent approximation.

Also, to prevent re-inclusion of header files, people usually do something like this:

myheader.h
#ifndef MYHEADER_H
#define MYHEADER_H

.. Entire header file ...

#endif
/* ifndef MYHEADER_H */

This prevents weird recursion problems from having a header file included twice at the top of a C file.

It's sloppy, and I don't recommend doing this, because if you *need* to do this, you're already down the dangerous road they've been speaking of and you ultimately need to fix that or you'll just have a *monstrous* headache at competition when you're rapidly changing code.

Jeff McCune 07-02-2004 19:19

Re: Compiler Help Needed
 
Also, you can completley eliminate floating point from your code.

#define axelWidth 0.725

becomes:

#define AXEL_WIDTH_NUM 29
#define AXEL_WIDTH_DEN 40

Constants that are #defined are usually all caps by convention.

Also, keep in mind that when using integers, order of operations isn't the same as it is in your math class. Well, it is, but the order of operations will affect the result of the equation.
Code:

// Consider:
#define NUM 50
#define DEN 100
int foo = NUM / DEN * joy1_y
int bar = NUM * joy1_y / DEN

foo will ALWAYS be 0. Always. this is becuase NUM divided by DEN in integer math will be 0, and 0 multiplied by anything is zero. bar will contain what you think it should based on the equation.

Basically, stick to integer math, and multiply to the biggest number you can before starting to divide using integers to prevent always multoplying by zero.

josh_johnson 07-02-2004 20:11

Re: Compiler Help Needed
 
Quote:

Originally Posted by Jeff McCune
Basically, stick to integer math, and multiply to the biggest number you can before starting to divide using integers to prevent always multoplying by zero.

This can be a dangerous aproach, as often the largest value is too large for the variable type that you are putting it in, but the final result would fit just fine. Just make sure that any intermediate values are not going to be too large before doing this.

Astronouth7303 07-02-2004 21:08

Re: Compiler Help Needed
 
Quote:

Originally Posted by Mike Soukup
... From the names of your variables & the way you use them, it looks like those are values that will never change while your code is being executed, ie a constant. If so, there is no need to use a variable to store the values, use a #define instead:

Code:

#define axelWidth  .725
#define wheelRadius  .105
#define clicksPerRevolution  16

...

I, personally, have had problems with #declare in place of const, and only use it for alias, Example:
Code:

//Some constants
const char Varience = 10;
const char True = 255;
const char bLAH = 152;

//Some aliases
#declare Left_OI p1_y
#declare Left_Motor pwm01
#declare DyNoMiTe relay8

As long as you keep it in headers and include them, you should be ok.

deltacoder1020 07-02-2004 21:48

Re: Compiler Help Needed
 
first of all, it's "#define", not "#declare"

second, the reason you are having problems is because mcc18 automatically casts any number from 0 to 255 as an unsigned char, which can screw up math. instead, what you'd want is this:

#define Varience ((char) 10)

Random Dude 08-02-2004 02:05

Re: Compiler Help Needed
 
Quote:

Originally Posted by Jeff McCune
As an example, when using a microcontroller, using this:

#define PI (22 / 7)

is *considerably* faster than using 3.14159... and it gives a fairly decent approximation.

Umm.. But (22/7) evaluates to (3).

Astronouth7303 08-02-2004 19:02

Re: Compiler Help Needed
 
Only in integer math (pi rounded down is three).

Ps- My bad on the #declare!

deltacoder1020 08-02-2004 19:28

Re: Compiler Help Needed
 
Quote:

Originally Posted by Random Dude
Umm.. But (22/7) evaluates to (3).

technically, 3 is a "decent approximation" for pi... but heck, if you're gonna do that, just do what some crazy state legislature tried to do, and

#define PI 3

;)

Random Dude 08-02-2004 20:44

Re: Compiler Help Needed
 
Quote:

Originally Posted by Astronouth7303
Only in integer math (pi rounded down is three).

Ps- My bad on the #declare!


Yes, exactly (22/7) is integer math (22.0/7) would be floating point. [Or ((float)22/7)]


All times are GMT -5. The time now is 03:58.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi