Chief Delphi - pic: 926 ON THE BAR

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)

- - pic: 926 ON THE BAR (http://www.chiefdelphi.com/forums/showthread.php?t=25804)

CD47-Bot

22-02-2004 15:28

pic: 926 ON THE BAR

loading photo ...

jacob_dilles

22-02-2004 15:29

Re: pic: 926 ON THE BAR

how did you guys make it up the 6 inches with thos tiny wheels?

edomus

22-02-2004 15:30

Re: pic: 926 ON THE BAR

Quote:

Originally Posted by jacob_dilles

how did you guys make it up the 6 inches with thos tiny wheels?

must be magic, I sure cant see how

Cory	22-02-2004 15:36

Re: pic: 926 ON THE BAR

Those wheels sure look to be the same size that we're using.

I can assure you we get onto the step :D

Cory

edomus

22-02-2004 15:40

Re: pic: 926 ON THE BAR

Quote:

Originally Posted by Cory

Those wheels sure look to be the same size that we're using.

I can assure you we get onto the step :D

Cory

are they spaced that far apart?

Cory	22-02-2004 15:43

Re: pic: 926 ON THE BAR

Approximately the same, yes, although a bit closer together, maybe

Cory

edomus

22-02-2004 15:45

Re: pic: 926 ON THE BAR

Quote:

Originally Posted by Cory

Approximately the same, yes, although a bit closer together, maybe

Cory

then how do you do it my fine friend. How do you prevent bottoming out

ngreen

22-02-2004 16:26

Re: pic: 926 ON THE BAR

Quote:

Originally Posted by edomus

then how do you do it my fine friend. How do you prevent bottoming out

momentum..

The chassis looks fairly high compared to the wheels too.

tkwetzel

22-02-2004 18:51

Re: pic: 926 ON THE BAR

My guess is that they went up the small steps and around the goal. Then pulled themselves up from there.

Jay H 237

22-02-2004 19:39

Re: pic: 926 ON THE BAR

Good job! We're also using pnuematics to pull ourselves up. Our compressor runs quite a bit but our pnuematics have worked flawlessly so far.

All times are GMT -5. The time now is 20:32.