Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   USB to Serial -- Working Device Found! (http://www.chiefdelphi.com/forums/showthread.php?t=25823)

Eko 22-02-2004 19:28

USB to Serial -- Working Device Found!
 
On our third try with USB to Serial devices, we found one that works (in a useful amount of time)!

Device Specs:
----------------
Brand: ATEN (IOGEAR)
Model: GUC232A
Store: Best Buy
Price: ~$30
Website: http://www.iogear.com/

Computer Specs:
----------------
Operating System: MicroSoft Windows XP Home
Computer Type: Laptop
USB Version: 1
Must have CD-ROM drive for driver installation.

We plugged the device in while the CD was in the drive, the drive spun up, and it installed. We restarted. Voila, it works.

Good luck!

Astronouth7303 22-02-2004 20:41

Re: USB to Serial -- Working Device Found!
 
Like, You actually downloaded something? That's AWESOME!!! :):):):):)

KevinB 22-02-2004 21:32

Re: USB to Serial -- Working Device Found!
 
Have you tested this device with the Dashboard?

Kevin Karan 22-02-2004 21:47

Re: USB to Serial -- Working Device Found!
 
Ive been using belkins one since the start with no problems...

Jeff McCune 22-02-2004 21:59

Re: USB to Serial -- Working Device Found!
 
Quote:

Originally Posted by Kevin Karan
Ive been using belkins one since the start with no problems...

I've been using a keyspan USB -> serial adapter hooked to an XBox since the begining as well. Works great.

Joe Matt 22-02-2004 22:48

Re: USB to Serial -- Working Device Found!
 
Quote:

Originally Posted by Jeff McCune
I've been using a keyspan USB -> serial adapter hooked to an XBox since the begining as well. Works great.

Question: Does it work on Macs?

Kevin Karan 22-02-2004 22:54

Re: USB to Serial -- Working Device Found!
 
Is there even an IFIloader for macos?... must..resist..the..earge..to....bash....macs!

CharlieWilken 23-02-2004 00:44

Re: USB to Serial -- Working Device Found!
 
We had a practice competition today in Los Angeles. Our robot and another robot controlller had problems freezing up in program mode when using a USB to series converter. We had to use the routine described in another post to unfreeze the controller.(push reset and program down at the same time.....release reset until a green light comes ......release program button.)

ChrisA 23-02-2004 11:11

Re: USB to Serial -- Working Device Found!
 
Remember to make sure that the baud rate is set properly. I've got a USB>Serial by GoldX and it seems to be working fine. It's slower than a normal serial because of the conversion, but it works and that's all that counts.

The first couple tries we had with the converter didnt't work because we forgot to check the baud rate so the controller did that fun program error thing and needed a hard reset.

D.J. Fluck 23-02-2004 11:25

Re: USB to Serial -- Working Device Found!
 
Complements of Joe Johnson,

http://www.tigerdirect.com/applicati...84-26886&Tab=0

He says it works and its only 14.99

Jeff McCune 23-02-2004 12:56

Re: USB to Serial -- Working Device Found!
 
Quote:

Originally Posted by JosephM
Question: Does it work on Macs?

Yeah, the keyspan adapter came from a mentor who bought it for his powerbook. Works great under Linux and OSX.


All times are GMT -5. The time now is 22:04.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi