HELP!!! RC NOT RUNNING!!!
 

:ahh: What does orange-green-orange-green mean for the program state LED?
:ahh: When I download my competition code with printf, I get that. When I download without, I get an infinate loop error. :ahh:
HELP?!?!? :confused:

And the default code works

[edit]I'm hitting refresh till i get a response! im frantic! i pnaicing! im not spellchacking! HELP!!!!!!! :ahh: [/edit]

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I'm getting the same problem too, only for me, it runs without the autonomous code, it gives the code error thing when i load the default IR code, and does the flashy thingie when i put my autonomous code into it (even if i dont ever call it). So dont think you're the only one.

-Kesich

I'm gonna kill my engineers; lets see if they take 6 weeks to build it next year....

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

try updating the firmware.. or if you already did try hitting it with a hammer until it works

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Already updated firmware. And i don't use hammers on electronics

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Say, There is a compile option for large/small space. Would that have to do with this?

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Never heard of the error before, but you might want to try the hard reset as detailed in Team Update #7. G2G

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I've done the hard reset, updated the firmware, everything. This sort of error is just not listed. And i also do not get a RAM dump before you ask.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

first released an error in the default code where the variables were not initlized at the begening of autonomus mode. check to see if you have the latest version of the default code.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I'm running my own code, and Uer_Autonomous_Code() and Default_Routine() have been totally rewritten. (I call default_routine Map_IO()).

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Sorry if this is overly obvious, but make absolutely sure that you have both a Getgata(&rxdata) and a Putdata(&txdata) function call in whatever loop you are executing. If the user doesn't handle data properly it shuts itself down.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

If your code (not data, meaning variables) is over 32k (I think. It might be 64k) in compiled size, you have to use the large memory model. Check the size of the .HEX file. If it is greater than 32k or 64k and you don't have any large arrays or stuff like that, try the large model.

Try downloading the default code (sorry if you already tried this). It might be that somehow your code is entering an infinite loop/it takes too long to process something and the master processor shuts it down. We had this happen to us do to a hardware component malfunstioning and our code wasn't built to handle the values it was recieving.

--EDIT--
That second error would be indicated by a flashing orange LED, so I don't think that is it.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

After e-mailing IFI about it, it turns out in Kevin's interupt code, I accidently set timer1 to High Priority :yikes:. I would post it here, but I'd rather save it until after regional (maybe just Buck-eye, not West MI). I'll test it tonight and tell you about it.

What about the other Problem? If I don't include a #define, printf_lib doesn't get compiled (My design), and I get a green-orange-green-orange I described in the first post. :confused: IFI says they can't recreate it. Help?

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I got the same error and fixed it by following these steps:
1)Press and hold the RESET and PROG buttons at the same time.
2)Release RESET; continue to hold PROG until the "Battery Power" light becomes a solid green
3)Release PROG
4)Hit Reset

I don't know if this will help but it fixed the problem for me so i hope that it does for u too. :yikes:

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

tried and tried again. still nothing. and i never changed kevin's timer interupt code, but ill check anyways.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I believe the timer initialization needs to be changed to enable them.

Aparently, that bug fixed both problems (Sort of, with printf() I get garbage)

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Since nobody else has mentioned it on this thread, we would like to remind you that whenever you get a flashing red Program State LED indicating a code error, you can find out more information by using the Dashboard Viewer.

Make sure your OI and RC are linked via tether or radio, connect your PC's serial port to the DASHBOARD port on your OI, make sure the OI/RC jumper is set to "RC", and you will see details about the type of error which caused the flashing red LED at the bottom of the Dashboard Viewer window.

This is how we diagnosed Astronouth's problem, and it may also help you, Kesich.

Regards,
The Firmware Team
Innovation First, Inc.

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

We tried covering ours with Loctite, and it made all our code problems go away. (Actually, it made all the plastic sides of the robot controller go away, and the code would no longer run.....)

VIOLA...no more nasty code bugs! :ahh:

-Quentin

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Cool. Didn't know it did that. :)

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Im having the same problem at the moment with my program ... heh , I think I might re-write the whole code, have you tried re-writing your program in the newest version of FR_code ?

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

I was having the same problem until I did the following

1) update your firm ware

2) translate all your code from the older default to the newest , dont just put your files in their , copy and paste everything you need

3) keep the back up battery plugged in

I hope that helps you, that what fixed the problem with my RC :cool:

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

Someone mentioned printf working strangely...

I put printf statements through out my program to trace and debug it.

But the program's output has been appearing erratically all of a sudden! That is sometime it just doesn't perform the printf or skips a function call. Has anyone heard of this before? Any solutions?

So much great code, and so little time to debug it!

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

We started getting a similar error. We then spent 3 hours removing parts of our code until we got all the way down to an empty main function with no interrupts. Then we rebuilt main using only the necessary functions to establish communication between the master and the user. Then we readded all our previous code, and it worked. Then we compared the version that worked with the version that didn't work.

Apparently, if you put a printf in your code anywhere before you call Initialize_Serial_Comms(), your program will enter a state where the program state led is flashing red/green and not even turning the robot off and back on will fix it. And it doesn't do it the first time you run the code. It only enters that state once you download the code then reset the robot, and once it enters that state it never leaves until you redownload code (not even the special prog/reset button routine fixes it).

Re: AAAUUUGGGHHH!!! RC NOT RUNNING!!!
 

The printf() is buffered, so it might just not be sending back the data right away. That should mean that you still get everything, just not right away, but it may be weird and do something like over writing what is already in the buffer if what is being written and what is already there is larger than the buffer can hold. Something like that. Or it may be that something changed in you code and it really is skipping those functions that you think are being called. Weird error. :)