pic: Cyber Blue 234 Hangs
 

Re: pic: Cyber Blue 234 Hangs
 

this isn't us hanging...obviously...this is us in the starting position.

Re: pic: Cyber Blue 234 Hangs
 

Very cool guys, I always like to see what you are comming up with.

Now if I am right, it was the genious mind of Ryan D. that built the entire robot right (lol j/k, well maybe in 3ds max)?

I especially like the little cute bumber in front.

On a serious note: I like the tank drive powered by CIM motors and your 2x ball handeling looks sweet. Also the way your treds are positioned looks like they won't drive up on the small balls which is a big plus.

Re: pic: Cyber Blue 234 Hangs
 

That's one robot I'd like to see in action! I like the diamond plate in front. Is the lettering cut out of it with a blue background behind it or is it a decal? I can't really tell in the picture and the laptop I'm on now has a small screen.

Re: pic: Cyber Blue 234 Hangs
 

To answer your question, there is a thin sheet of blue plastic behind the diamond plate.

Thanks for the compliments. Maybe we'll see you at Nats :cool:

Re: pic: Cyber Blue 234 Hangs
 

I must say, it's very impresive. I'd really like to see this one in action. :)

Re: pic: Cyber Blue 234 Hangs
 

Note that the picture of our robot hanging is in this thread - http://www.chiefdelphi.com/forums/sh...ad.php?t=26352
:]

Re: pic: Cyber Blue 234 Hangs
 

actually it's the CIM coupled with the drills running each side. similar to our design last year...but not running through drill tranny