Chief Delphi - ADXRS300EB Rate Gyro

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - ADXRS300EB Rate Gyro (http://www.chiefdelphi.com/forums/showthread.php?t=27382)

rmeenaks

05-04-2004 19:54

Re: ADXRS300EB Rate Gyro

1 Attachment(s)

Hi,

Thanks to all. I now have a prototype and it is working like a champ! :D
Here is a picture of the interface:

rmeenaks

05-04-2004 19:58

Re: ADXRS300EB Rate Gyro

Quote:

Originally Posted by rmeenaks

Hi,

Thanks to all. I now have a prototype and it is working like a champ! :D
Here is a picture of the interface:

Forgot to mention that now I am off to build the two-wheeled balancing robot using lego mindstorms. Yipeeee!!!

Cheers,

Ram

Ryan M.

05-04-2004 20:27

Re: ADXRS300EB Rate Gyro

Quote:

Originally Posted by rmeenaks

Forgot to mention that now I am off to build the two-wheeled balancing robot using lego mindstorms. Yipeeee!!!

Cheers,

Ram

That'll be fun. ;)

Out of curiousity, do you use the default firmware, or an alternative like Lejos, BrickOS (former LegOS), PBFORTH (ick.), etc?

rmeenaks

05-04-2004 22:37

Re: ADXRS300EB Rate Gyro

Quote:

Originally Posted by Texan

That'll be fun. ;)

Out of curiousity, do you use the default firmware, or an alternative like Lejos, BrickOS (former LegOS), PBFORTH (ick.), etc?

Currently using the default firmware with NQC just for testing the sensor. I will eventually use BrickOS since the response rate is alot faster. Doubt you can even do this with the default firmware/NQC. Havent tried Lejos nor PBForth. I'll post the my progress in the forums.....

Cheers,

Ram

All times are GMT -5. The time now is 05:17.

Page 2 of 2

Show 100 post(s) from this thread on one page