Chief Delphi - HEX CRAWLER...

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Chit-Chat (http://www.chiefdelphi.com/forums/forumdisplay.php?f=14)

- - HEX CRAWLER... (http://www.chiefdelphi.com/forums/showthread.php?t=28276)

Arefin Bari

28-04-2004 20:55

HEX CRAWLER...

hey... i am currently working on a hex crawler bot with two other team members... which is about a feet and a half by a ft. and about half a ft. high... using 12 servos... the hexcrawler kit i got was from PARALLEX... for some reason when we turned it on... one of the servo started smoking... we opened up the servo and the board inside was fried... we are guessing that too much voltage was supplied to the servo... can anyone else come up with some other reason for the servo (board) getting fried...?

Jay H 237

28-04-2004 21:25

Re: HEX CRAWLER...

It could have been defective to begin with. I would also guess it could have been bound up internally or externally when it tried to move. I've never taken one apart so I really don't know exactly what's inside one or how many components/pieces are in there.

Arefin Bari

30-04-2004 23:17

Re: HEX CRAWLER...

have anybody ever worked on this hex crawler .... its called "Parallex Hex Crawler"... www.parallex.com ... i need the code and if possible a picture of the breadboard diagram... thanks...

sanddrag

01-05-2004 00:12

Re: HEX CRAWLER...

Quote:

Originally Posted by mechman108

have anybody ever worked on this hex crawler .... its called "Parallex Hex Crawler"... www.parallex.com ... i need the code and if possible a picture of the breadboard diagram... thanks...

All of that should be on the Parallax website. At least I know it is for the Boe-Bot.

All times are GMT -5. The time now is 22:03.