PWM Cable Clip for Victors
 

Cool product: http://robotcombat.com/marketplace_ifi_esc2.html

Re: PWM Cable Clip for Victors
 

I never knew something like that existed! We've had the PWM cables come loose more than a few times. At least with them being stainless steel they won't rust and with almost no weight adding them shouldn't be an issue. The price is also very reasonable and a good insurance policy for not having to worry about losing a cable in the middle of a match. I might even buy some of them and donate them to my team.

Now the big question, I wonder if FIRST is planning on including some of them in the KOP for next year. :D

Re: PWM Cable Clip for Victors
 

Excellent find, before we ended up gluing in the connectors, but that way we were unable to change cables or take them out. This could be very handy, might even look into machining them, doesn't look too hard.

Re: PWM Cable Clip for Victors
 

I think it would be more of a lasercutting/waterjet and bending type of thing with sheet metal rather than machining out of a solid block.

Re: PWM Cable Clip for Victors
 

Or...
you could probably make one with some sheet metal, a pair of tin snips, and a ruler.

snip, snip, bend bend.... done.

Re: PWM Cable Clip for Victors
 

That's a very good idea. Our team had one come out right when we were about to hang this year, preventing us from doing so. Thanks for the link...I"m definetly going to look into making some of those this year.

Re: PWM Cable Clip for Victors
 

That's more what I was talking about. Aluminum or steel sheet, band saw, pliers, and some goood ol' elbow grease should do the trick.

Re: PWM Cable Clip for Victors
 

I recall seeing those at one point. They seem pretty useful, especially if you've got to attach Victors a ways away from the robot controller.

On the other hand, a good whack can still spell disaster for those cables. Maybe it'd be simpler/cheaper to zip-tie the PWM cable to the Victor, then screw the Victor to the robot. With the zip-tie put inside the screws, your cable is going nowhere fast. (And you can always use a pin and defeat the ratchet if you have to switch cables.)

Perhaps we FIRSTers could learn a trick or two from the Battlebots set. I mean, we both have to come with a pretty durable machine, given how things get on the field. (Of course, the intent of the way things get is different, or so we hope!)

(I'm reminded of a trick I once read where a person used a zip tie to hold the battery connectors together. Not once was there a problem.)

Re: PWM Cable Clip for Victors
 

There might not have been an actual problem but that "solution" presented a large potential problem. If the battery had to be unplugged quickly because of short or other dangerous situation, it would be bad news for whoever is trying to unplug it. Velcro strap is much better. But, I suppose this discussion should be left for another thread.

Re: PWM Cable Clip for Victors
 

That little clip is cool, but that whole site is amazing. This another one of those times that I feel stupid for not thinking to search for a site like this. The site has lots of other stuff that is exactly up our alley. Small gearboxes designed for our purposes. Wheels, and lots of other good stuff. Everyone should definitley take a look. I definitley see a couple of parts that my team may very well be using.