Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robotics Education and Curriculum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=66)
-   -   Receiver to control unit connection (http://www.chiefdelphi.com/forums/showthread.php?t=30935)

Bob16 26-10-2004 12:26

Receiver to control unit connection
 
we have re-built our Education Robot and we are trying to find out which connection to hook into. Can you help!! :)

Billfred 26-10-2004 12:49

Re: Receiver to control unit connection
 
I'm afraid you'll have to be more specific...what are you trying to do? Which sets of connectors are you talking about?

sanddrag 26-10-2004 13:21

Re: Receiver to control unit connection
 
Perhaps this PDF will be of some benefit.

Bob16 27-10-2004 08:41

Re: Receiver to control unit connection
 
We are using a three wire connector and we need to go from a 8 channel receiver to the control unit. I just need to know which R/C PWM IN to hook into from channels 2 and 3 on are reciever.

Mark McLeod 27-10-2004 09:20

Re: Receiver to control unit connection
 
Quote:

Originally Posted by Bob16
We are using a three wire connector and we need to go from a 8 channel receiver to the control unit. I just need to know which R/C PWM IN to hook into from channels 2 and 3 on are reciever.

See page 6 of the PDF Sanddrag posted.
You should also look at the 2004 EDU Default Software Reference Guide to see what each of the controls will do. The documents you need are on the IFI website http://innovationfirst.com/FIRSTRobo...umentation.htm


All times are GMT -5. The time now is 06:02.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi