Chief Delphi - where can I get info on extruded aluminum?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - where can I get info on extruded aluminum? (http://www.chiefdelphi.com/forums/showthread.php?t=31131)

MattB703

12-01-2005 22:45

Re: where can I get info on extruded aluminum?

Quote:

Originally Posted by MASherry

how much does 80/20 weigh?

The typical 1010 series that is often used (1" by 1") weighs about 0.5 lbs/ft.

Cory	12-01-2005 22:51

Re: where can I get info on extruded aluminum?

Quote:

Originally Posted by MattB703

The typical 1010 series that is often used (1" by 1") weighs about 0.5 lbs/ft.

that's the structural material only... if you don't weld it, you're gonna have to add a LOT of weight for the connectors and bolts.

Dom Ruggieri

12-01-2005 23:39

Re: where can I get info on extruded aluminum?

Item is defenitly the best stuff to go with. there 20 x 20 mil is really light, it's strong.

Peter Matteson

13-01-2005 07:43

Re: where can I get info on extruded aluminum?

1" X 1" is .495 lb/ft (part #1010)

1.5" x 1.5" is 1.015 1b/ft (part #1515)

It's listed on pg 36-37 of the catalogue. And yes I use this stuff so much I didn't have to look up the page number. :o

www.8020.net

Stu Bloom

13-01-2005 09:55

Re: where can I get info on extruded aluminum?

Quote:

Originally Posted by SCYTE16

I really need tech. specs and to find prices for extruded aluminum/plastic/other metals. I'm on the R&D (research and development) team for MORT (team 11) and i really need to find this. plz help. the R&D team just started this year so we have no places with info to just look it up so if you could help i would be very grateful or we will end up like this :confused: :confused: :ahh: :confused: :confused:

Check out http://www.onlinemetals.com/ for all types of extruded shapes (and any other "forms") in a great selection of materials. The site also has several helpful resources/links. If you want to send me your email address I can set you up with a 5% discount code (guaranteed SPAM-FREE). Good Luck!

MASherry

13-01-2005 12:44

Re: where can I get info on extruded aluminum?

i was wondering if anyone had 80/20 size 1010 in inventor format..i think its .ipt please respond asap

james

13-01-2005 14:23

Re: where can I get info on extruded aluminum?

Cheap material..........dude if you want polycarb half price order it here they deliver http://www.harborsales.net/index.cfm? send a fax with your school state tax # to avoid that cost .For FREE aluminum get in yer car and cruise the indistrial parks and look for a compant that does aerospace fabrication .Or check the yellow pages for METAL FABRICATION they will have sheet stock and xtrusion.Then look for MACHINE shops they do milling and lathe work and mace block stock.When yopu get to know these peeps they will ley U dig in the scrap pile and do shop work for you .

Jim :yikes:

All times are GMT -5. The time now is 08:36.

Page 2 of 2

Show 100 post(s) from this thread on one page