Chief Delphi - 2005 electrical diagram

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - 2005 electrical diagram (http://www.chiefdelphi.com/forums/showthread.php?t=32256)

Mike Betts

10-01-2005 09:11

Re: 2005 electrical diagram

Quote:

Originally Posted by Stephen Kowski

lol then you/your team has been around for a few years and between the image here and other robots you probably having sitting somewhere you can access fairly quickly.....you all should be able to put this thing together without THE SCHEMATIC ;)

gl

Yeah, we have 11 of them! However, old robots are a different subject altogether. We will likely have a team installing the camera on last year's robot in parallel.

I was refering to this year's drive base. We need it up and running to work on new sensors, linearizing the output stage, navigation, trajectory planning, et cetera.

Lots to do and the clock is ticking,,,

Greg Marra

10-01-2005 13:09

Re: 2005 electrical diagram

Quote:

Originally Posted by Mike Betts

Not to mention a dead week we have because of midterms. Well, not entirely dead, but much more dead than is ideal.

That new scripting language is what I want to play with. But first we have to get all the encoders and accelerometers and such hooked up and good to go.

Al Skierkiewicz

10-01-2005 15:46

Re: 2005 electrical diagram

Electrical diagram is now available under robot documentation.

lupjohn

10-01-2005 16:21

Re: 2005 electrical diagram

Quote:

Originally Posted by Al Skierkiewicz

Electrical diagram is now available under robot documentation.

Al;
I also found it on the InnovationFirst website under the heading for the Robot controller. I looked for it late Saturday evening on my home dialup connection to no avail. Today it is found. Larry Upjohn (692)

All times are GMT -5. The time now is 20:49.

Page 2 of 2

Show 100 post(s) from this thread on one page