Chief Delphi - Who's missing parts?

Page 2 of 3

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - Who's missing parts? (http://www.chiefdelphi.com/forums/showthread.php?t=32334)

Lisa Perez

09-01-2005 12:53

Re: Who's missing parts?

Quote:

Originally Posted by Eric Reed

I think the lead wires are attached to the pilot valves.

That's where we were confused, because they list the assembly and the valves separately and each item has a description on the list. Also, their code numbers are different.

Alexander McGee

09-01-2005 12:53

Re: Who's missing parts?

Quote:

Originally Posted by Mike Rush

We are also missing a Globe and a Van Door motor as well as the two hall effect sensors. :(

This is the exact equiptment we are missing. However, we also are missing the power supply for the operator interface.

Mr. Steve

09-01-2005 12:54

Re: Who's missing parts?

We are also missing the two motors that everyone else is we found the hall effects stuck to the accelerator in the bubble wrap. There is a second master link inside the chain box

Just wondering did anyone get a sub base (SY3000-27-1T), if so, what is it?

Joshua May

09-01-2005 13:03

Re: Who's missing parts?

I just checked back and we are missing one Globe Motor and one Van Door Motor as well.

jgannon

09-01-2005 13:09

Re: Who's missing parts?

Quote:

Originally Posted by Mr. Steve

There is a second master link inside the chain box

Thanks... that's one of the things we were missing.

Quote:

Originally Posted by Mr. Steve

Just wondering did anyone get a sub base (SY3000-27-1T), if so, what is it?

At our kickoff, they handed them to us separate from the KOP, with the Mabuchi motor. They are white pneumatics parts... can't tell you much more than that. I'm a programmer. :p

Jeffrafa

09-01-2005 15:07

Re: Who's missing parts?

Quote:

Originally Posted by Mr. Steve

Just wondering did anyone get a sub base (SY3000-27-1T), if so, what is it?

its the manifold peice to the double solenoid valves (SY3240-5LOZ). This year these valves didn't come assembled, so you half to screw the sub base on the bottom (don't forget the seal) then screw on each of the solenoids (listed Pilot valve SY114-6LOZ)

Hope this helps

Covey41

09-01-2005 17:24

Re: Who's missing parts?

I just read the FRC Q&A questions, I am amazed at the number of people who are asking about the LED Clusters.

I asked the question about the LED clusters at the Kickoff, and was told by Tony from IFI, that there was a question whether or not that they would be available for Kickoff. They also felt after the problems with the LED covers last year, getting new ones at each event, would ensure working LEDs.

And Yes these are the "New and Approved" version.

greenleader

09-01-2005 18:20

I too could not find that part.

I found everything else but that. I see others refer to it as the Van Door Motor like last year.

Greenleader

Nitroxextreme

09-01-2005 18:51

Re: Who's missing parts?

Quote:

Originally Posted by magnasmific

This is the exact equiptment we are missing. However, we also are missing the power supply for the operator interface.

the power supply for the operator interface is not a battery it is ac adaptor

We are missing one of the taigene motors
however in the missing parts section of the team management program
it asks if we need left or right
how can u tell if the motor is left or right

tiffany34990

09-01-2005 19:02

Re: Who's missing parts?

yeah...thank goodness we did the inventory today....my team is missing a few motors and other things too.. :(

all well it'll come -- and gotta to recall to save a nice spot for the lights this year..it's weird we get it at a competition..all well

enjoy all the cool electronics and all in the kit of parts

shyra1353

09-01-2005 19:13

Re: Who's missing parts?

we are missing a Van Door motor and a Globe motor as well ..

and like sanddrag one of our motors is labeled bad, twice.

meaubry

09-01-2005 20:04

Re: Who's missing parts?

Quote:

Originally Posted by Lisa Perez

We are missing a globe, a lead wire assembly, and a chain link.

Meaubry - maybe the mabuchi? It's in a different grouping on the list of parts.

Thanks Lisa, you were correct on the Mabuchi. I also found the Hall effects snuggled up against the magnet on the other part in the bubble wrap bag.

Shawn60

09-01-2005 22:30

Re: Who's missing parts?

I am trying to place my missing part order on FRIST. I don't see the box for the Sliding door motor. Am I blind or is it not there.

Shawn
Team 60

Squirrelrock

10-01-2005 09:17

Re: Who's missing parts?

Quote:

Originally Posted by Jeffrafa

We are missing the same two motors, globe and van door (we have 1 of each but the inventory says 2) as well as we are unsure about only having 1 pneumatics tank and we are missing a couple little things from pneumatics (just a few fittings, not a big deal)

As j flex said, it lists the LED clusters as something you recieve AT the event, somewhat odd i thought, but not a big deal.

Mike, as far as the hall effect sensors - look carefully, we found our hall effect sensors in the bubble wrap bag with the accelerometer actually stuck to the metal housing of the accelerometer (they are very small, only about 1/4" dia. and pretty short w' 4 pins sticking out of them.)

617's missing the same motors as mentioned above, as well as one clippard tank, and a couple of other minor items. However, the gearboxes provided in the kit are awesome! They got put together really quickly after we found the small replacment set screws and the washers in another plastic bag.

Bob Steele

10-01-2005 12:28

Re: Who's missing parts?

1018 is missing the same stuff mentioned here by many

Taigene Van door motor (1)
Globe motor (1)

I am not sure whether we were "supposed" to get two (2) Clippard tanks or not..
the kit of parts says (1) .... the pneumatics manual talks of using (2) and the missing parts listing from TIMS has the number (2) which would indicate that we were supposed to get two as in previous years..questions have been submited to QA but no answers yet..

good luck

All times are GMT -5. The time now is 10:51.

Page 2 of 3

Show 100 post(s) from this thread on one page