Re: Inventor Tetra Connector
 

thanks a million guys, we have completed the side goals, but are still in a dead end when it comes to the centre goal, as we do not have any drawings of the centre couplet or the base couplet.

I will put up a drawing of the goal if we get how to make it, hopefully by tomorrow
In the meantime, any help on how to make them will be greatly appreciated

Re: Inventor Tetra Connector
 

We'll post it on our website as soon as we have it (the site) set up for it - probably in a couple of days. The assembly is way to large a file to post as an attachment - the connector alone just made it under the 100K limit.

Re: Inventor Tetra Connector
 

please do post the completed tetra.........better to share our resources than try to build one from scratch.

Re: Inventor Tetra Connector
 

I tried opening that one that was posted, but when it opened, I could not see the part. Mousing over the model parameters, I could see the outline, but how do i make it visable?

I'm using Inventor 8 Pro

Re: Inventor Tetra Connector
 

You have to open the file.

Once it is open drag the little red circle with a white X named END OF PART to the last place on the list.

This is located in the browser bar. If you do not see the red circle click view, then toolbars and then click on browser bar.

I will try to post the tetra without the end caps...

Re: Inventor Tetra Connector
 

we are trying to create a centre goal to test our robot design, but we are having problems with the base couplet (flat surface) and the middle couplet (four attachments)
has anyone been able to create that? FIRST did not provide the design in their manual
help on making them would be greatly appreciated
CAD, Team 1241

Inventor Tetra Assembly Download
 

Here's the link to our Inventor 30 in. Tetra (http://www.cybersonics.org/cybersoni.../30inTetra.zip)

Re: Inventor Tetra Connector
 

my version of inventor won't open the tetra file. any chance you can post a step file or anything else so i can use it unitl i get the newest stuff. thanks.

Re: Inventor Tetra Connector
 

I probably won't be able to post it until Friday, but I'll let you know when the STEP file is up.

Re: Inventor Tetra Connector
 

Hey guy the ifirobotics web site has full cad models of the tetras the center goal in step

http://www.ifirobotics.com/first-2005-field-parts.shtml