Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Transmission gear ratio (http://www.chiefdelphi.com/forums/showthread.php?t=32467)

MASherry 10-01-2005 16:26

Transmission gear ratio
 
I searched already...does anyone know the gear ratio on the kit transmission?

indieFan 10-01-2005 16:37

Re: Transmission gear ratio
 
I did a rough calculation yesterday and got a 1:17 gear ratio.

indieFan

Ryan Foley 10-01-2005 16:39

Re: Transmission gear ratio
 
The transmission is a 12.75 : 1 gear ratio, the sprockets are a 28:21 gear ratio, this combines for a 17:1 gear ratio.

The Guidelines document has a lot more info on the transmissions and motors you may find useful. Look for it around pages 7, 8, and 9.

Paul Copioli 10-01-2005 19:21

Re: Transmission gear ratio
 
It is exactly (50/14)*(50/14), or 625/49 which approx. equals 12.7551:1.

This is in the kit transmission manual located here. Right click on "FIRST 2005 Transmission Manual -RevA" and select "save target as".

-Paul

MASherry 10-01-2005 21:59

Re: Transmission gear ratio
 
thanks guys..does anyone know the size of the gear box witht eh motors attached??

M. Hicken 13-01-2005 09:31

Re: Transmission gear ratio
 
big and heavy

Adam Richards 13-01-2005 10:32

Re: Transmission gear ratio
 
These are just estimates, but probably 4.5"-5" depth on the gearbox and 5-7lbs.


All times are GMT -5. The time now is 15:46.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi