Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Viewing Angle of Camera (http://www.chiefdelphi.com/forums/showthread.php?t=32690)

Joe Johnson 13-01-2005 13:18

Viewing Angle of Camera
 
Does anyone have a spec or done an experiement to know the maximum viewing angle of the CMUcam2 (left/right viewing angle and up/down viewing angle)?

I looked but didn't find anything in the documentation. Sorry if I missed it.

Joe J.

Mike Betts 13-01-2005 13:27

Re: Viewing Angle of Camera
 
Joe,

As usual, you and I are heading down the same path. When the camera sights two vision tetras, the "center" of the combination will be tracked...

An interesting problem. N'est-ce pas?

CJO 13-01-2005 13:36

Re: Viewing Angle of Camera
 
I do not know the angle offhand, but it is possible to close down the window size to reduce the view area.

Joe Johnson 13-01-2005 13:51

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by CJO
I do not know the angle offhand, but it is possible to close down the window size to reduce the view area.

While I know I must be heading someplace good if Betts is leading the way, in this case, I think he is out there blazing a path while I have not yet packed my bags.

My reason for asking was more along the lines of "How much of the field can I see?" rather than "How can I keep from seeing too much?"

In this case, software is no help. It can reduce my field of vision by ignoring pixels but it can't increase it by adding pixels to the side of a CCD array.

So... ...my question remains.

Anybody know and willing to tell us?

Joe J.

petek 13-01-2005 22:06

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by Joe Johnson
Does anyone have a spec or done an experiement to know the maximum viewing angle of the CMUcam2 (left/right viewing angle and up/down viewing angle)?

I looked but didn't find anything in the documentation. Sorry if I missed it.

Joe J.

I measured it tonight: about 60 degrees field of view.

techtiger1 13-01-2005 22:20

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by petek
I measured it tonight: about 60 degrees field of view.

Nice. Data you guys. I asked a simliar question before but it was about the actual range of the cmu2. How far can that camera see before the object it out of sight. I looled thru the manual but could not find anything on the distances. Thanks everyone.

Alan Anderson 14-01-2005 09:37

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by techtiger1
Nice. Data you guys. I asked a simliar question before but it was about the actual range of the cmu2. How far can that camera see before the object it out of sight. I looled thru the manual but could not find anything on the distances. Thanks everyone.

It's a camera. It doesn't have a range limit. How far away it can detect something would depend on the size and brightness of what it's looking at. I am certain it would have no problems seeing an object nearly a hundred million miles distant, if that object were sufficiently large and well lit.

Joe Johnson 14-01-2005 11:09

Re: Viewing Angle of Camera
 
60 Degrees both in the UP/DOWN and LEFT/RIGHT direction?

Joe J.

petek 14-01-2005 13:25

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by Joe Johnson
60 Degrees both in the UP/DOWN and LEFT/RIGHT direction?

Joe J.

I measured just left/right.

Al Skierkiewicz 14-01-2005 13:44

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by Joe Johnson
60 Degrees both in the UP/DOWN and LEFT/RIGHT direction?

Joe J.

Joe,
The lens is listed as a 4.9 mm, F2.8 lens(I had to search but found it on one of the CMUII sites). The target area is 4.86 mm x 3.64 mm. for a diagonal of nearly 1/4", the listed specification for this device. Plug in the numbers for the diagonal and the focal length and it comes out to about 60 degrees. Since the aspect ratio for this camera is 4:3, the horizontal look angle is less than 60 degrees and the vertical is even smaller. This of course is in a perfect world and the lens in this camera is not self compensating for focus, distance to pickup, etc. so the FOV (field of view) will vary from camera to camera. According to my lens calculator (fudging for the tiny pickup area, my calc only goes down to 1/2") FOV (horizontal) is 22-25 ft. at 20 ft from the camera.

petek 14-01-2005 14:11

Re: Viewing Angle of Camera
 
Quote:

Originally Posted by Al Skierkiewicz
Joe,
...According to my lens calculator (fudging for the tiny pickup area, my calc only goes down to 1/2") FOV (horizontal) is 22-25 ft. at 20 ft from the camera.

That correllates well with my measurement of about 9 ft (left:right) at a radius of 9 ft. If the aspect ratio is 4:3, then you should expect about 60 degrees horizontally x 45 degrees vertically. I wasn't trying to measure the FOV to high accuracy - figure 9 ft. +/- 3 in. - but somehow I doubt that FOV accuracy is going to be that critical a factor with these cameras...


All times are GMT -5. The time now is 15:50.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi