Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   Camera Mount? (http://www.chiefdelphi.com/forums/showthread.php?t=32701)

AnkurG 13-01-2005 16:53
Camera Mount?
 
I was looking at the mount that IFI tells us to make for the robot. The one that places the board into the project box. My question is that how would you protect the front of the whole camera board and camera? That, I think, is the most delicate part and it will need to be somewhere on the outside of the bot because it needs a clear view of the field. But if it is out there then it can easily get hit and most likely break.

Al Skierkiewicz 14-01-2005 07:50
Re: Camera Mount?
 
Quote:
Originally Posted by AnkurG
I was looking at the mount that IFI tells us to make for the robot. The one that places the board into the project box. My question is that how would you protect the front of the whole camera board and camera? That, I think, is the most delicate part and it will need to be somewhere on the outside of the bot because it needs a clear view of the field. But if it is out there then it can easily get hit and most likely break.
Why does it need to be outside?

Mike Betts 14-01-2005 09:20
Re: Camera Mount?
 
I would worry more about the assembly. Hit the assembly with a 130 lb robot and the servo will be history.

The manner of protection is left as an exercise for the student...

Mr. Lim 14-01-2005 09:26
Re: Camera Mount?
 
Quote:
Originally Posted by AnkurG
I was looking at the mount that IFI tells us to make for the robot. The one that places the board into the project box. My question is that how would you protect the front of the whole camera board and camera? That, I think, is the most delicate part and it will need to be somewhere on the outside of the bot because it needs a clear view of the field. But if it is out there then it can easily get hit and most likely break.
The Radio Shack project box they specifiy comes with a cover. You drill holes in it to let the lens, TTL and cables poke through, and it seems to offer a bit of protection.

We've built one as shown in the "Start Here" document. I will try and snap a picture for you tonight.

-SlimBoJones...


All times are GMT -5. The time now is 01:03.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi