Chief Delphi - TI Pressure Sensor this year?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - TI Pressure Sensor this year? (http://www.chiefdelphi.com/forums/showthread.php?t=32728)

TI Pressure Sensor this year?

I didn't see the TI 5CP3-7 pressure sensor this year in our kit.
Has it been deleted?

It's listed in the "2005 pneumatics component" page at:
- http://www.pneumaticsfirst.org/2005Game/Components.htm

(Or is that just a renaming of the 2004 kit's webpage?)

- Keith

Re: TI Pressure Sensor this year?

quote snipped from http://www.chiefdelphi.com/forums/sh...2&postcount=10

Quote:

Originally Posted by dlavery

"You could use any legal pistons or valves from last years pneumatics kit (all the elements of the 2004 pneumatics kits are included in this years kit, except we get two double solendoid valves instead of a single and a double, and the Texas Instruments pressure transducer is missing), and they would be permitted under <R91>."

<R91> states that the TI Pressure Transducer from the 2004 FRC KOP may be used this year but was not included in the 2005 FRC KOP.