Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   CMUCam not working. (http://www.chiefdelphi.com/forums/showthread.php?t=32976)

Matt Krass 17-01-2005 22:48
CMUCam not working.
 
My team is having difficulties using the CMUCam. We've properly powered the camera, and connected it to two different laptops and were unable to get it working. We've made sure our terminal software, and port settings are correct. When we apply power the power LED lights, along with a single status LED. We have read the documentation and think we might be missing the clock jumper, but can't locate its position on the board. Any assistance is appreciated.

P.S. The CMUCam software also does not work.

Marc P. 17-01-2005 22:50
Re: CMUCam not working.
 
There's another thread about problems with the CMUcam here.

Mike Betts 17-01-2005 23:16
Re: CMUCam not working.
 
Quote:
Originally Posted by Matt Krass
My team is having difficulties using the CMUCam. We've properly powered the camera, and connected it to two different laptops and were unable to get it working. We've made sure our terminal software, and port settings are correct. When we apply power the power LED lights, along with a single status LED. We have read the documentation and think we might be missing the clock jumper, but can't locate its position on the board. Any assistance is appreciated.

P.S. The CMUCam software also does not work.
Matt,

I followed the directions in the "start here" pdf documentation and it worked fine. I know you to be a very competent technical individual so I will skip the normal #$%^%& and ask which Java did you install?

Mark McLeod 18-01-2005 08:23
Re: CMUCam not working.
 
Quote:
Originally Posted by Matt Krass
We have read the documentation and think we might be missing the clock jumper, but can't locate its position on the board. Any assistance is appreciated.
In the "CMU Cam Assembly.pdf" diagram there is:
  • A jumper on the "Oscillator Connect"
  • A jumper on the "Internal Power to Servos" (although this won't affect your inital tests).
Make sure it's not connected to the TTL port on the RC controller.

If you continue to have trouble, want to take a drive to Hauppauge?

SeanCassidy 18-01-2005 14:08
Re: CMUCam not working.
 
Quote:
Originally Posted by Mike Betts
Matt,

I followed the directions in the "start here" pdf documentation and it worked fine. I know you to be a very competent technical individual so I will skip the normal #$%^%& and ask which Java did you install?
Hello. (I'm on matt's team) I installed the latest JVM from www.java.com. My serial port works fine for everything except this.


All times are GMT -5. The time now is 17:27.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi