Chief Delphi - Power out puts

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Power out puts (http://www.chiefdelphi.com/forums/showthread.php?t=33179)

ErinColleen

21-01-2005 11:17

Power out puts

What are the optimal power out puts from all the differnt motors we are given in the kits?

Mike Betts

21-01-2005 11:25

Re: Power out puts

Quote:

Originally Posted by ErinColleen

What are the optimal power out puts from all the differnt motors we are given in the kits?

Please search. This subject is covered in quite a few threads at this point.

Tom Schindler

21-01-2005 14:19

Re: Power out puts

I'd highly recommend Dr. Joe's motor calculation spreadsheet...

It's an oldie, but the underlying physics of motors stays the same-- Just plug in the key values (Stall Torque, Stall Current, Free Speed, Free Current etc) and it will give you the plots you need.

http://www.chiefdelphi.com/forums/pa...gle&paperid=15

Best of luck!

Tom

All times are GMT -5. The time now is 18:12.