Chief Delphi - Breaker Panel weight

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Breaker Panel weight (http://www.chiefdelphi.com/forums/showthread.php?t=33237)

Emily Pease

22-01-2005 12:31

Breaker Panel weight

Hello, we don't have a functional scale right now, and I cannot find the weight of this year's breaker panel online anywhere; does anyone happen to know it off-hand?

Also, does anyone else find it strange that the Innovation FIRST website will tell you the weight of the Operator Interface, but not the weight of the Robot Controller? I'm assuming they're roughly the same weight.

Al Skierkiewicz

23-01-2005 18:31

Re: Breaker Panel weight

Quote:

Originally Posted by Emily Pease

Never assume. The weight of the breaker panel will vary with the number os breakers you install. The only way to be sure is weigh it with the correct breakers installed, don't forget the breaker for the RC.

Emily Pease

24-01-2005 08:50

Re: Breaker Panel weight

Quote:

Originally Posted by Al Skierkiewicz

The weight of the breaker panel will vary with the number os breakers you install. The only way to be sure is weigh it with the correct breakers installed, don't forget the breaker for the RC.

I'm certainly aware that adding breakers to the breaker panel will increase the total weight, but I'm interested in finding out the weight of the breaker panel itself. Does anyone have that number handy?

Biff	24-01-2005 11:20

Re: Breaker Panel weight

Panel with no breakers is 15.6 oz. We are doing all our masses in Oz's this year and converting to lbs in the final totals for each category.

Emily Pease

24-01-2005 12:22

Re: Breaker Panel weight

Quote:

Originally Posted by Biff

Panel with no breakers is 15.6 oz. We are doing all our masses in Oz's this year and converting to lbs in the final totals for each category.

Thanks so much, Biff!

All times are GMT -5. The time now is 04:31.