clib.lib not being read
 

Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "main.c" -fo="main.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "ifi_utilities.c" -fo="ifi_utilities.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "ifi_startup.c" -fo="ifi_startup.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "printf_lib.c" -fo="printf_lib.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "user_routines_fast.c" -fo="user_routines_fast.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mcc18.exe" -p=18F8520 "user_routines.c" -fo="user_routines.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Executing: "C:\mcc18\bin\mplink.exe" "18f8520user.lkr" "C:\2005 Files\main.o" "C:\2005 Files\ifi_utilities.o" "C:\2005 Files\ifi_startup.o" "C:\2005 Files\printf_lib.o" "C:\2005 Files\user_routines_fast.o" "C:\2005 Files\user_routines.o" "C:\2005 Files\ifi_library.lib" "C:\mcc18\lib\clib.lib" /o"default code.cof"
MPLINK 3.90, Linker
Copyright (c) 2004 Microchip Technology Inc.
Error - could not find file 'clib.lib'.
Errors : 1

BUILD FAILED: Sun Feb 13 14:10:14 2005


clib.lib is not being found when it is right in the project. I compiled clib.lib and it says it is a syntax error. Fixing this syntax error leads to another, then another, and so on. Is this program defective?

Re: clib.lib not being read
 

clib.lib should NOT be in the project folder. If it is you are not using the compiler correctly.

The MPLAB library path may not be set correctly.

Under Project -> Build Options -> Project
make sure the Library Path is set to where you have the compiler installed, e.g., c:\mcc18\lib

Re: clib.lib not being read
 

thanks, everything's up and running again