Chief Delphi - Vision Tetra Placement?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Vision Tetra Placement? (http://www.chiefdelphi.com/forums/showthread.php?t=34699)

AnkurG

15-02-2005 15:52

Vision Tetra Placement?

I was just wondering about when the two vision tetras will be placed on the field. Will it be before the robots are placed or will it be the second before autonomous period starts? I looked around the forums and could not find an answer. The reason I am asking is because this will determine whether our robot should scan for a tetra at the beginning of AI or not. Any help would be appreciated.

Thank You

BLAZE

15-02-2005 15:54

Re: Vision Tetra Placement?

To my knowledge, the Vision Tetras will be placed on the field before Auto. Mode. That's why you can put scanners on your robot to ID them during the Auto. Period.

tkwetzel

15-02-2005 16:02

Re: Vision Tetra Placement?

To my knowledge, the vision tetras will not be placed until the robots have been placed, though I can not find where it says that right now.

RoboCat05

15-02-2005 16:19

Re: Vision Tetra Placement?

I believe they are placed after the robots are placed so that teams can not place the robot based on where the vision tetras are located.

dlavery

15-02-2005 22:21

Re: Vision Tetra Placement?

The vision tetras are placed on the field after the robots are positioned, but before the start of the autonomous period. See Rule <G05>:

Quote:

<G05> The VISION TETRAS will be placed on the field by field attendants after the ROBOTS have been positioned. The locations of the VISION TETRAS will be determined by random selection from a set of 8 possible starting locations (as identified on the “2005 Field Lines and Layout” drawing). ROBOTS may not be repositioned or manipulated in any manner after the VISION TETRAS have been placed on the field.

-dave

All times are GMT -5. The time now is 10:39.