Chief Delphi - pic: Taigene

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Taigene (http://www.chiefdelphi.com/forums/showthread.php?t=34733)

Nuttyman54

27-01-2008 22:20

Re: pic: Taigene

Quote:

Originally Posted by Nuttyman54 (Post 686249)

The specs for the 2008 Van Door Motor (Taigene) are here. This is the Van Door motor, not the window motor.

Apparently the link no longer works. If you search for 2008 Motor Data you should find a thread about it.

STEMiscool

06-01-2015 11:11

Re: pic: Taigene

We are interseted in using the taigene vandor motor for a forklift pulley system on our robot this year. We need to know if it is compatiable with a motor talon or victor motor controller or should we use a cim with a gearbox.

Al Skierkiewicz

06-01-2015 11:34

Re: pic: Taigene

Any controller can be used to power this motor. Controllers and motors are not limited except as listed in Table 4-4.
However, I would caution users that wish to run two of these motors on a single relay.

All times are GMT -5. The time now is 00:57.

Page 2 of 2

Show 100 post(s) from this thread on one page