Wiring Nasson switch
 

We've been looking through the 2005 pneumatics manual and it says to connect the nason pressure switch to the pwm cables but does not give a diagram how. Could anyone please elaborate on how to wire it?
sorry if this shoulda been posted in wiring

Re: Wiring Nasson switch
 

2 ten3brousone:
This thing my team had to figure out on our own, but now that I know I can share.
To wire the pressure switch to the RC digital I/O you have to use white and black wires of the PWM cable. The red one you don't need, so you can get rid of it. Then just take the black and white wires and connect them to the terminals on the pressure switch, it doesn't matter which one where, because it's just going to be open or closed (current passing through it or not) that's why there's no difference in wire positioning.

Re: Wiring Nasson switch
 

ah thanks

Re: Wiring Nasson switch
 

Eugene:

We having trouble with coding for it; our team has new programmers and we aren't sure what to do for the Nasson switch. :ahh: :ahh: :)

Re: Wiring Nasson switch
 

The default code is already setup.
No programming necessary if you hook the pressure switch to Digital input 18 and the PWM control cable for the compressor spike to Relay 8.